Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Simulation and optimization on round pin forming based on Simufact   2020 ,45(11):1-6
· Analysis and improvement on plastic forming process for structure   2020 ,45(11):7-12
· Development of forging process for cold rolling work roller with hig…   2020 ,45(11):13-19
· Optimization on forging process parameters for 12 t ingot based on ort…   2020 ,45(11):20-24
· Bending springback control of advanced high-strength steel Strenx960   2020 ,45(11):25-29
· Optimization on laser cutting process path based on bidirectional an…   2020 ,45(11):30-35
· Influence law of round hole flanging parameters on forming quality of …   2020 ,45(11):36-43
· Influences of hot rolling pass on microstructure and mechanical prop…   2020 ,45(11):44-48
· Influences of large deformation hot rolling process on microstructure …   2020 ,45(11):49-52
· Influence of fillet radius on hot stamping springback of V-shaped par…   2020 ,45(11):53-59
· Optimization on bending process for minimizing springback angle of U-s…   2020 ,45(11):60-66
· Influence of cryogenic treatment on low-temperature impact performan…   2020 ,45(11):67-72
· Optimization on stamping process parameters for aluminum hood based …   2020 ,45(11):73-81
· Influence of process parameters on cutting quality in optical fiber l…   2020 ,45(11):82-88
· Ultra-high cycle fatigue behavior for Ti6Al4V titanium alloy blade for…   2020 ,45(11):89-93
· Spinning compound forming process for pear-shaped six-way part   2020 ,45(11):94-100
· Influence of ultrasonic rolling force on surface structure, hardness a…   2020 ,45(11):101-105
· Stretch-bending process of profile frame with obtuse angle under disp…   2020 ,45(11):106-110
· Finite element analysis and optimization based on flanging fracture mo…   2020 ,45(11):111-119
· Influence of rolling deformation on sulfide in free-cutting steel cont…   2020 ,45(11):120-125
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com