[1]缪军,姜天亮,龚红英. 基于Dynaform的L形件弯曲工艺参数优化分析[J]. 上海工程技术大学学报, 2018, 32(3):46-51.
Miao J, Jiang T L,Gong H Y. Optimal analysis of bending process parameters of L-shaped parts based on Dynaform [J]. Journal of Shanghai University of Engineering and Technology, 2018, 32 (3): 46-51.
[2]Choi K K, Kim N H. Design optimization of springback in a deepdrawing process[J]. AIAA Journal, 2002, 40(1): 147-153.
[3]Wagoner R H, Lim H, Lee M G. Advanced issues in springback[J]. International Journal of Plasticity, 2013, 4545: 3-20.
[4]Viswanathan V, Kinsey B, Cao J. Experimental implementation of neural network springback control for sheet metal forming[J]. Journal of Engineering Materials and Technology, 2003, 125(2): 141-147.
[5]Kitayama S, Huang S, Yamazaki K. Optimization of variable blank holder force trajectory for springback reduction via sequential approximate optimization with radial basis function network[J]. Structural and Multidisciplinary Optimization, 2013, 47(2):289-300.
[6]Jiang C, Han X, Liu G R, et al. The optimization of the variable binder force in U-shaped forming with uncertain friction coefficient[J]. Journal of Materials Processing Technology, 2007, 182(1-3):262-267.
[7]Sharad G, Nandedkar V M . Springback in sheet metal U bending-fea and neural network approach[J]. Procedia Materials Science, 2014, 6:835-839.
[8]林忠钦,刘罡,李淑慧,等. 应用正交试验设计提高U形件的成形精度[J].机械工程学报,2002,38(3):83-89.
Lin Z Q,Liu G,Li S H,et al. Improving the forming accuracy of U-shaped parts by orthogonal experimental design [J]. Journal of Mechanical Engineering, 2002, 38(3): 83-89.
[9]陈磊,杨继昌,张立文. 板料弯曲回弹影响因素的有限元模拟研究[J].材料科学与工艺,2007,15(2):269-272.
Chen L,Yang J C,Zhang L W. Finite element simulation study on Influencing factors of sheet metal bending springback [J]. Material Science and Technology, 2007, 15(2): 269-272.
[10]Velmanirajan K, Thaheer A S A, Narayanasamy R, et al. Numerical modelling of aluminium sheets formability using response surface methodology[J]. Materials & Design, 2012, 41:239-254.
[11]苟春梅, 董静. 基于正交试验的车身加强板拉延成形多目标优化[J]. 锻压技术, 2018,43(5):41-44.
Gou C M, Dong J. Multi objective optimization of drawing forming of body stiffener based on orthogonal test [J]. Forging & Stamping Technology, 2018, 43(5):41-44.
[12]张高贤. U形件成形工艺参数优化研究[D].杭州:浙江大学,2004.
Zhang G X. Study on Optimization of Forming Process Parameters for U-shaped Parts [D]. Hangzhou: Zhejiang University, 2004.
[13]宋飞飞,杨合,李恒,等. TA18高强钛管数控弯曲回弹工艺参数影响的显著性分析[J]. 稀有金属材料与工程, 2013, 42(1):43-48.
Song F F,Yang H,Li H,et al. Significance analysis of the influence of numerical control bending springback process parameters on TA18 high strength titanium tubes [J]. Rare Metal Materials and Engineering, 2013, 42(1): 43-48.
|