[1]Tisza M. General overview of sheet incremental forming [J]. Journal of Achievements in Materials and Manufacturing Engineering, 2012, 55(1):113-119.
[2]周建宇, 杨明顺, 李言, 等. 金属板料单点渐进成形下压点分散的等高线混合成形轨迹生成 [J]. 锻压技术, 2017, 42(2):38-44.
Zhou J Y, Yang M S, Li Y, et al. Hybrid forming trajectory generation of contour lines with single point incremental forming of metal sheet under the dispersed under draught points [J]. Forging & Stamping Technology, 2017, 42(2):38-44.
[3]Liu Z B, Daniel W J T, Li Y L, et al. Multipass deformation design for incremental sheet forming:Analytical modeling, finite element analysis and experimental validation [J]. Journal of Materials Processing Technology, 2014, 214(3):620-634.
[4]朱虎, 杨晓光. 五轴数控渐进成形干涉检测与修正研究 [J]. 机械工程学报, 2014, 50(7):168-175.
Zhu H, Yang X G. A study on the interference detection and correction in 5axis CNC incremental forming [J]. Journal of Mechanical Engineering, 2014, 50(7):168-175.
[5]谭富星, 李明哲, 蔡中义. 带孔网板数字化多点成形过程中拉裂缺陷的有限元分析 [J]. 机械工程学报, 2008, 44(6):120-124.
Tan F X, Li M Z, Cai Z Y. Finite element analysis of fractures in the process of digital multipoint forming for retiary sheet metal [J]. Journal of Mechanical Engineering, 2008, 44(6):120-124.
[6]Chen J J, Liu W, Li M Z, et al. Digital manufacture of titanium prosthesis for cranioplasty [J]. International Journal of Advanced Manufacturing Technology, 2006, 27(11-12):1148-1152.
[7]Moiduddin K, Darwish S, AlAhmari A, et al. Structural and mechanical characterization of custom design cranial implant created using additive manufacturing [J]. Electronic Journal of Biotechnology, 2017, 29(6), 22-31.
[8]孙卫和, 熊洪淼, 韩洪强, 等. 带孔杯形件成形变形趋向性实验研究 [J]. 锻压技术, 2002, 27(5):19-21.
Sun W H, Xiong H M, Han H Q, et al. Experimental study on forming deformation tendency of cup shaped parts with holes [J]. Forging & Stamping Technology, 2002, 27(5):19-21.
[9]谭利广, 肖小亭, 温华典, 等. 带预制孔筒形件拉深成形金属流动规律的研究 [J]. 锻压技术, 2011, 36(6):114-119.
Tan L G, Xiao X T, Wen H D, et al. Research on the law of metal flow in deep drawing forming with prefabricated hole cylinder [J]. Forging & Stamping Technology, 2011, 36(6):114-119.
[10]张淑芹, 王进, 史继臣, 等. 网孔板渐进成形性能 [J]. 锻压技术, 2016, 41(8):48-52.
Zhang S Q, Wang J, Shi J C, et al. Hole plate incremental forming performance [J]. Forging & Stamping Technology, 2016, 41(8):48-52.
[11]Tan F X, Li M Z, Cai Z Y, et al. Numerical simulation of wrinkling in multipoint forming process of titanium alloy retiary sheet [J]. Journal of Xi′an Jiaotong University, 2007, 41(9):1026-1030.
[12]Gttmann A, Korinth M, Schfer V, et al. Manufacturing of individualized cranial implants using two point incremental sheet metal forming [J]. Future Trends in Production Engineering, 2012, 23(5):1386-1387.
[13]Rauch M, Hascoet J Y, Hamann J C, et al. A new approach for toolpath programming in incremental sheet forming [J]. International Journal of Material Forming, 2008, 1(1):1191-1194.
[14]Zhu H, Lin W W, Bai J L. An overview of the sheet metal CNC incremental forming toolpath generation [J]. Advanced Materials Research, 2012,503-504:35-39.
|