Transactions of Materials and Heat Treatment

Title：Influence of punching speed on springback in Ubending process for autobody steel sheets

Authors： Qin Zhiguang Chen Hongrong Dai Yanxia

Unit： Yibin Vocational and Technical College

KeyWords： auto-body steel sheet punching speed springback Ubending SPCC steel sheet DP780 steel sheet

ClassificationCode：TG382

year,vol(issue):pagenumber：2018,43(10):72-75

Abstract：

In order to clarify the influence of punching speed on springback, the springback in the Ubending process for SPCC and DP780 autobody steel sheets at the punching speed of 0.05-50 mm·s-1 was studied by experiment and numerical simulation, and the influence mechanism of punching speed affecting on the springback was analyzed. The experiment results show that the springback of DP780 steel sheet is higher than that of SPCC steel sheet. Meanwhile, the springback of SPCC steel sheet decreases with the increasing of punching speed, and the springback of DP780 steel sheet increases with the increasing of punching speed. Hence, the influences of punching speed on springback for different materials should be taken into account to improve the dimension accuracy of formed parts. The numerical simulation results show that the springback behavior of SPCC steel sheet is insensitive to strain rate because there is larger difference of tangential stress between top and bottom layers at the side wall region due to the inertia effect. But the DP780 steel sheet is sensitive to springback behavior affected by strain rate strengthening.

Funds：

宜宾职业技术学院院级科研项目(ybzysc17-07)

覃智广（1978－），男，硕士，讲师，E-mail：lili_8204@sina.cn

Reference：

[1]李雅. 汽车覆盖件冲压成形技术[M].北京：机械工业出版社，2012.

Li Y. Automobile Panel Stamping Technology [M].Beijing: China Machine Press, 2012.

[2]熊保玉. 汽车顶盖拉延成形工艺模拟及质量控制[J]. 锻压技术, 2016, 41(5): 48-52.

Xiong B Y. Simulation and quality control on car roof in drawing process[J]. Forging & Stamping Technology, 2016, 41(5):48-52.

[3]李光耀，王琥，杨旭静，等. 板料冲压成形工艺与模具设计制造中的若干前沿问题[J]. 机械工程学报，2010，46（10）：31-39.

Li G Y, Wang H, Yang X J, et al. Some new topics on proces design and mould manufacture for sheet metal forming[J]. Journal of Mechanical Engineering, 2010, 46（10）：31-39.

[4]褚勇，李全伟，祝林. 汽车轻量化用铝合金板冲压成形性研究[J]. 模具技术，2014，(5):9-12.

Chu Y, Li Q W, Zhu L. Research on formability of aluminum alloy sheet for lightweight of automobile[J]. Die and Mould Technology，2014，(5):9-12.

[5]龚志辉，钟志华，杨旭静. 汽车外覆盖件回弹评价方法及应用[J]. 汽车工程，2007, 29（4）：351-354.

Gong Z H, Zhong Z H, Yang X J. The evaluation of springback for autobody panels and its application[J]. Automotive Engineering, 2007, 29（4）：351-354.

[6]罗云，蒋文春，杨滨，等. 材料强化模型对回弹计算模拟精度的影响[J]. 机械强度，2015, 37（3）：551-555.

Luo Y, Jiang W C, Yang B, et al. Effect of material work hardening model on the simulation precision for springback[J]. Journal of Mechanical Strength，2015, 37（3）：551-555.

Service：

【This site has not yet opened Download Service】【Add Favorite】