|
Abstract：
|
|
For the requirements of a horizontal CNC spinning machining center with multi process integration, a convenient and efficient tailstock structure with good neutrality and stability was designed, and the tailstock hydraulic system providing stable tail force and realizing the fast feed-working and feed-fast retract was established by the electro-hydraulic control method to ensure the spinning process running smoothly. Then, its tailstock hydraulic system simulation model during actual spinning forming was built by software SimulationX, and the tail displacement, speed, system pressure and tail force were simulated. Furthermore, the relative error of the fast feed and fast retract between the simulation results and experimental results are only 3.94% and 7.50% respectively, and the relative error of the system pressure and tail force between the simulation results and theoretical results are only 5% and 0.4% respectively. Thus, the accuracy of simulation model and the reliability of hydraulic system were verified.
|
|
Funds：
|
|
广东省公益研究与能力建设专项项目（2016A010 102011）；广州市科技计划项目（201804010135）
|
|
AuthorIntro：
|
|
作者简介：熊英超（1992-），男，硕士研究生
E-mail：xychaoem@163.com
通讯作者: 夏琴香（1964-），女，博士，教授
E-mail：meqxxia@scut.edu.cn
|
|
Reference：
|
［1］袁玉军，夏琴香，肖刚锋,等.大长径比不等径筒形件旋压成形试验研究
［J］.锻压技术,2014，39(4):42-46.
Yuan Y J,Xia Q X,Xiao G F,et al.Experimental research on spinning forming of large slenderness ratio cylinders with different diameters
［J］. Forging & Stamping Technology，2014，39(4):42-46.
［2］俞大辉，李新和，周磊,等. 大减薄率薄壁半球形封头扩径旋压的失稳研究
［J］. 塑性工程学报,2016，23(4):48-54.
Yu D H，Li X H，Zhou L，et al.Diameter-expanding spinning instabilities of thin-walled semi-spherical head at a high thinning rate
［J］. Journal of Plasticity Engineering，2016，23(4):48-54.
［3］王成和，刘克璋，周路.旋压技术
［M］.福州：福建科学技术出版社,2017.
Wang C H,Liu K Z,Zhou L.Spinning Technology
［M］. Fuzhou: Fujian Science and Technology Press，2017.
［4］赖鹏.旋压成形设备设计关键技术研究及应用
［D］.杭州：浙江大学，2014.
Lai P.Research on Key Technology of Spinning Machine and Its Application
［D］.Hangzhou: Zhejiang University，2014.
［5］戴国勇，夏琴香，程秀全. 基于马鞍车床的三旋轮旋压机尾座改造
［J］. 锻压技术，2015，40(1):66-70.
Dai G Y,Xia Q X,Chen X Q.Tailstock transformation of three-roller spinning machine based on gap-bed lathe
［J］. Forging & Stamping Technology，2015，40(1):66-70.
［6］张利平.液压传动系统设计与使用
［M］.北京：化学工业出版社，2010.
Zhang L P. Design and Use of Hydraulic Transmission System
［M］. Beijing: Chemical Industry Press,2010.
［7］彭熙伟，杨会菊. 液压泵效率特性建模的神经网络方法
［J］. 机械工程学报，2009，45(8):106-111.
Peng X W,Yang H J.Modeling the efficiency characteristics of hydraulic pump via neural networks
［J］.Journal of Mechanical Engineering，2009，45(8):106-111.
［8］闻邦椿，张义民，鄂中凯,等. 机械设计手册
［M］. 北京：机械工业出版社，2010.
Wen B C，Zhang Y M，E Z K，et al. Mechanical Design Manual
［M］. Beijing: China Machine Press，2010.
［9］王秋林. 大吨位精冲机快速缸液压系统的设计与仿真
［J］. 锻压技术，2017，42(8):71-76.
Wang Q L.Design and simulation on fast cylinder hydraulic system for large-tonnage fine blanking press
［J］. Forging & Stamping Technology，2017，42(8):71-76.
［10］Wang C，Quan L. Study on simulation and experiment of hydraulic excavator′s work device based on simulation X
［A］. International Conference on Electric Information and Control Engineering
［C］. Wuhan:IEEE，2011.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved