|
Abstract：
|
|
The billet is difficult to place in large-scale hot die forging process, and the positioning accuracy in the die strongly influences the final forging quality and the required equipment tonnage. In order to realize the swift and accurate positioning of the long axial billet in complex die, for a special long axial railway irregular part positioning in the pre-forging process of solid forging, based on the analysis of kinematic potential energy, the final positioning deviation of the billet under the deviations of initial position and orientation was predicted by multi-body dynamics software Adams. On the basis of orthogonal simulation results, the influences of each initial deviation factor on the positioning deviation and orientation deviation of the final billet positioning state were analyzed, and the feasible assistant positioning method was obtained to improve the positioning accuracy allowance of the billet initial position, which were finally verified by simulating the plastic deformation process.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
作者简介：姜艺林（1993-），男，硕士研究生
E-mail：jyl15@mails.tsinghua.edu.cn
通讯作者：吴任东（1972-），男，博士，副教授
E-mail:wurd@tsinghua.edu.cn
|
|
Reference：
|
［1］Zhan M, Liu Y, Yang H. Influence of the shape and position of the preform in the precision forging of a compressor blade
［J］. Journal of Materials Processing Technology, 2002, 120(1-3): 80-83.
［2］Zhang D, Li S, Jing P. Initial position optimization of preform for large-scale strut forging
［J］. The International Journal of Advanced Manufacturing Technology, 2018,94(5-8): 2803-2810.
［3］葛瑜, 赵世启, 葛新锋. 传动轴端面齿突缘叉锻造工艺改进
［J］. 锻压技术, 2016, 10(41): 17-20.
Ge Y, Zhao S Q, Ge X F. Forging process improvement of face tooth flange fork on the drive shaft
［J］. Forging & Stamping Technology, 2016, 10(41):17-20.
［4］李蓬川, 周文武, 杨靖雲. 某机匣锻件模锻时新的坯料定位方法及坯料优化设计
［J］. 大型铸锻件, 2018, (2): 5-7.
Li P C, Zhou W W, Yang J Y. A New method of billet positioning and optimization design of billet in forming process of aeroenginee case
［J］. Heavy Casting and Forging,2018, (2): 5-7.
［5］欧文学. 大型模锻件坯料的定位状态分析与摩擦参数测定
［D］. 重庆: 重庆大学, 2016.
Ou W X. Analysis of Positioning Status of Large-scale Forging Billets and the Test of Friction Parameters
［D］. Chongqing: Chongqing University，2016.
［6］Wen T, Ou W X, Liu X. Predication and analysis of positioning status of large-scale billets on forging dies using multi-body dynamics simulation
［J］. The International Journal of Advanced Manufacturing Technology，2015, 80(1-4): 447-453.
［7］安雪斌, 潘尚峰. 多体系统动力学仿真中的接触碰撞模型分析
［J］. 计算机仿真, 2008, 25(10): 98-101.
An X B, Pan S F. Analysis of contact model in multi-body system dynamic simulation
［J］. Computer Simulation, 2008, 25(10): 98-101.
［8］江刚武. 空间目标相对位置和姿态的抗差四元数估计
［D］. 郑州: 解放军信息工程大学, 2009.
Jiang G W. A Robust Estimation Using Quaternions for Relative Pose of Space Object
［D］. Zhengzhou: Information Engineering University, 2009.
［9］Johnson K L. Contacts Mechanics
［M］. London: Cambridge University Press, 1985.
［10］吴飞科, 罗继伟, 张磊, 等. 关于Hertz点接触理论适用范围的探讨
［J］. 轴承, 2007, (5): 1-3.
Wu F K, Luo J W, Zhang L, et al. Discussion on application limit to Hertz′s contact theory
［J］. Bearing, 2007, (5): 1-3.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved