Transactions of Materials and Heat Treatment

Title：Finite element analysis on warm forging process for steering bearing rings

Authors： Zhang Wei Xia Gaoyu Wang Qiang Chen Hui

Unit： China University of Mining & Technology

KeyWords： Deform-3D warm forging steering bearing rings die

ClassificationCode：TG316

year,vol(issue):pagenumber：2016,41(12):14-25

Abstract：

The warm forging of steering bearing rings was simulated by finite element software Deform-3D, and the influences of the equivalent stress field, equivalent strain field, temperature field and forming load on forming temperature, preheating temperature, forming speed and friction coefficient under the warm forging process were studied to obtain the optimal process parameters. At the same time, the above process parameters were verified by experiment. The simulation results show that the forming effect of steering bearing rings is the best with the forging temperature 750 ℃,the preheating temperature of die 200 ℃,the forming speed 10 mm·s-1 and the friction coefficient 0.3. The experiment results under this condition show that the appearance quality of the forgings, geometry size, microstructure, hardness, etc. can satisfy the requirements. The turning, heat treatment, grinding and other follow-up processing based on the product process can make the forgings meet the requirements of quality.

Funds：

2014江苏省产学研前瞻性联合研究项目（BY2014028-02）

作者简介：张伟（1995-），男，本科 E-mail：1512029741@qq.com 通讯作者：陈辉(1980-)，男，硕士，讲师 E-mail：chenhui03990758@126.com

Reference：

［1］刘建生,陈慧琴,郭晓霞.金属塑性加工有限元模拟技术与应用
［M］.北京:冶金工业出版社,2003.

Liu J S, Chen H Q, Guo X X. Finite Element Simulation of Metal Plastic Forming Technology and Application
［M］. Beijing: Metallurgical Industry Press, 2003

［2］Zou G, Hua L, Qian D S. 3D coupled thermo-mechanical FE analysis of roll size effects on the radial–axial ring rolling process
［J］. Computer Mater.Sci.,2011,50:911-924.

［3］Wang X K, Hua L. Analysis of guide modes in vertical hot ring rolling and their effects on the ring,dimensional precision using FE method
［J］. J. Mech.Sci.Technology,2011,25:279-285.

［4］李永庆,颜波.有限元分析在汽车轮毅轴承单元中的应用
［J］.农业装备与工程,2008,(8):29-30.

Li Y Q, Yan B. The application of finite element analysis in automobile wheel hub bearing unit
［J］. Agricultural Equipment & Engineering,2008,(8):29-30.

［5］张存生.三维体积成形过程有限元模拟可视化技术研究与软件开发
［D］.济南：山东大学,2005.

Zhang C S. 3D V isualization Technology of Finite Element Simulation of Bulk Forming Process Research and Software Development
［D］. Jinan:Shandong University,2005.

［6］周飞,彭颖红,阮雪榆. Deform有限元分析系统及其在塑性加工中的应用
［J］.模具技术,1997,(4):20-27.

Zhou F, Peng Y H, Ruan X Y. Deform finite element analysis system and its application in plastic processing
［J］. Mould Technology,1997,(4):20-27.

［7］周朝辉,曹海桥,吉卫,等.Deform有限元分析系统软件及其应用
［J］.热加工工艺,2003,32(4):13-16.

Zhou C H, Cao H Q, Ji W,et al. Deform finite element analysis software and its application
［J］. The Hot Working Processes,2003,32(4):13-16.

［8］高锦张,陈文琳,贾俐俐，等.塑性成形工艺与模具设计
［M］.北京:机械工业出版社,2001.

Gao J Z, Chen W L，Jia L L, et al. Plastic Forming Technology and Mould Design
［M］.Beijing: China Machine Press,2001.

［9］曾珊琪,丁毅.模具寿命与失效
［M］.北京:化学工业出版社,2005.

Zeng S Q, Ding Y. Die Life and Die Failure
［M］.Beijing: Chemical Industry Press,2005.

［10］赵振铎,邵志明,张召铎,等.金属塑性成形中的摩擦与润滑
［M］.北京:化学工业出版社,2004.

Zhao Z D, Shao Z M，Zhang Z D, et al. The Friction and Lubrication of Metal Plastic Forming
［M］. Beijing: Chemical Industry Press,2004.

［11］孙曙宇,傅建,谢彬.锻造成形有限元数值模拟技术
［J］.现代制造工程,2008,(5): 49-50.

Sun S Y, Fu J, Xie B. Forging forming finite element numerical simulation technology
［J］.Modern Manufacturing Engineering,2008,(5): 49-50.

［12］郭钊,唐文亭,曹立勋.圆管异形孔冲裁工艺设计及有限元模拟
［J］.锻压技术,2014,39(8):140-145.

Guo Z, Tang W T, Cao L X. Process design and numerical simulation on shaped hole blanking of steel round pipe
［J］. Forging & Stamping Technology,2014,39(8):140-145.

［13］张莉,李升军.Deform在金属塑性成形中的应用
［M］.北京:机械工业出版社,2009.

Zhang L, Li S J. Deform in the Application of Metal Plastic Forming
［M］.Beijing: China Machine Press,2009.

［14］Yoon J H, Yang D Y. A three-dimensional rigid-plastic finite element analysis of bevelgear forging by using a remeshing technique
［J］.International Journal of Mechanical Sciences, 1990, 32(4): 277-291.

［15］Moon H K, Lee M C, Joun M S.Predicting polygonal-shaped defects during hot ring rollingusing a rigid-viscoplastic finite element method
［J］.International Journal of Mechanical Sciences, 2008, 50(2):306-314.

［16］张志武,双远华,张闯，等.高精度液压柔性冷拔工艺的有限元模拟和实验分析
［J］.锻压技术,2015,40(4):78-84.

Zhang Z W, Shuang Y H, Zhang C, et al. Numerical simulation and experimental analysis of hydraulic flexibility cold-drawing process with high precision
［J］. Forging & Stamping Technology,2015,40(4):78-84.

Service：

【This site has not yet opened Download Service】【Add Favorite】