|
During the three-roll planetary rolling, contact region distribution between roller and workpiece is the basis of the calculation of the rolling power. In the process of rolling, the extension deformation along the rolling axis of the workpiece is inevitable, and the contact region distribution is affected directly. On the basis of existing research, considering the influence of axial extension deformation of workpiece in rolling, the function of the contact region distribution was obtained by theoretical analysis. The parameters of the rolling process were given, and the specific distribution of contact region was numerically simulated. Results show that the contact region between roller and workpiece becomes narrow under the influence of the axial extension deformation of the workpiece. The results are not only more consistent with the actual contact situation between roller and workpiece than that in existing research, but also show that the distribution is affected by the rolling constant, inclined angle, offset angle,rolling speed and feeding speed of workpiece as well as the original size of workpiece.
|
|
［1］孙中建,李胜祗.斜轧变形区接触面上轴向滑移场计算[J].华东冶金学报.1989, 6(1):12-19.Sun Z J,Li S Z .Calculation on axial sliding field of contact area of deformation in skew rolling[J].Journal of East China Institute of Metallurgy，1989,6(1):12-19.
［2］李应强.三辊行星斜轧机力能参数计算[J].北京科技大学学报.1991,13(1):37-44.Li Y Q.The power calculation of three-roll[J]. Journal of University of Science and Technology Beijing,1991,13(1):37-44.
［3］张海兵,倪元相,刘晓星.行星斜轧的轧件变形区微分几何模型[J].重型机械,2007,(3):49-52.Zhang H B,Ni Y X,Liu X X. A differential-geometry model for planetary cross-mill[J].Heavy Machinery,2007,(3):49-52.
［4］张海兵,刘晓星,倪元相.行星斜轧中轧辊与轧件的几何关系分析[J].重型机械,2007,(5):37-41.Zhang H B,Liu X X,Ni Y X.The analysis of geometrical relation of roller and workpiece in planetary cross-mill[J].Heavy Machinery,2007,(5):37-41.
［5］Shih C K,Huang C H. Experimental and numerical analyses on three-roll planetary rolling process[J].Journal of Materials Processing Technology,2003,142:702-709.
［6］Shih C K,Huang C H,Hsu R Q. The finite element analysis on planetary rolling process[J].Journal of Materials Processing Technology,2001,113:115-123.
［7］张士宏,王炳德,朱士光,等.一种新型三辊旋轧试验机设计[J].锻压装备与制造技术,2007,42(2):40-42.Zhang S H,Wang B D,Zhu S G. Study on designing of a new type three-roll rotary experimental mill[J].China Metalforming Equipment and Manufacturing,2007,42(2):40-42.
［8］刘海,张士宏,程大勇.三辊行星轧制中轧辊与轧件接触区分布[J].锻压技术,2011,36(3):46-49.Liu H,Zhang S H,Chen D Y. Contact region distribution between roller and workpiece during three-roll planetary rolling[J].Forging & Stamping Technology,2011,36(3):46-49.
［9］Hwang Y M, Hsu H H,Tzou G T. A study of PSW rolling process using stream functions[J].Journal of Materials Processing Technology, 1998,(80):341-344.
［10］高建明.行星斜轧管工艺的理论分析[J].金属学报,1978,14(3):257-271.Gao J M. A theoretical analysis on large sized tube milling by planetary skew rolling[J].Acta Metallurgica Sinica,1978,14(3):257-271.
［11］李冰.铜管坯三辊行星轧制塑性变形机理与组织预测[D]. 沈阳：中国科学院金属研究所,2006.Li B. Plastic Deformation Mechanism and Microstructure Prediction of Copper Tube Billet During Three-roll Planetary Rolling[D]. Shenyang：Institude of Metal Research Chinese Academy of Science,2006.
［12］傅文祖.三辊行星斜轧机及其轧制力计算[J].上海金属,1985,6(2):13-20.Fu W Z. Three-roll planetary mill and its calculation of rolling force[J].Shanghai Design and Research Institute of Metallurgy,1985,6(2):13-20.
［13］曾庆龄,臧勇,朱旭,等.行星轧制过程中轴向滑动系数的研究[J].锻压技术,2015,40(5):84-89.Zeng Q L,Zang Y,Zhu X.Research on sliding coefficient of planetary rolling process[J].Forging & Stamping Technology,2015,40(5):84-89.
|
Copyright Forging & Stamping Technology.All rights reserved