Transactions of Materials and Heat Treatment

Title：Pressing process improvement of clamping plate for lifter

Authors： XIAO Ya-hui ZHOU Li-bo

Unit： Jilin Technology College of Electronic Information

KeyWords： clamping plate pressing process forming simulation

ClassificationCode：TG386

year,vol(issue):pagenumber：2013,38(6):52-55

Abstract：

From the technical analysis of the clamping plate and simulation of sheet metal forming, it is believed that there are some unreasonable parts in traditional technology. In order to solve such problems as difficulties in die manufacturing and maintaining and troubles in guarantee of the quality of products, the pressing technology was improved to compensate for the deficiency in traditional technology. Through the actual production in factories, it is proved that the improved technology has a strong feasibility, and the product quality and frock stability are improved, the production efficiency is increased and the manufacturing costs is reduced, which provide profitable references to the technological design of other similar pressing parts.

Funds：

Reference：

［1］王哲英，王可，姜杰.智能卡板的冲压工艺与级进模设计[J].锻压技术，2010，35(6)：92-94.Wang Z Y, Wang K, Jiang J. Design of progressive die for stamping smart card plate based on Pro/E[J]. Forging & Stamping Technology, 2010, 35(6):92-94.
［2］赵云路，耿丽华，苟春林，等.SY-1041轻型车桥壳成形工艺设计[J].锻压技术，1996，21(3)：22-24.Zhao Y L, Geng L H, Gou C L, et al. Technical design of shaping of axle housing of light vehicles[J]. Forging & Stamping Technology, 1996, 21(3):22-24.
［3］刘罡，程迎潮，江谷明，等.后盖外板上部冲压工艺改进[J].锻压技术，2009，34(6)：56-61.Liu G, Cheng Y C, Jiang G M, et al. Stamping process improvement of rear cover outer top[J]. Forging & Stamping Technology, 2009, 34(6):56-61.
［4］杨太德.支架冲压工艺与模具设计[J].锻压技术，2007，32(5)：101-102.Yang T D. Pressing technology of bracket and die design[J]. Forging & Stamping Technology, 2007, 32(5):101-102.
［5］岳睿，丁为民，周晓刚.升降器外壳冲压工艺设计[J].锻压技术，2007，32(2)：37-40.Yue R, Ding W M, Zhou X G. Stamping process design of elevation mechanism outer covering[J]. Forging & Stamping Technology, 2007, 32(2):37-40.
［6］王跃臻，赵振铎，刘建新，等.加油口冲压工设计[J].锻压技术，2008，33(6)：41-44.Wang Q Z, Zhao Z D, Liu J X, et al. Stamping process design of oil filler[J]. Forging & Stamping Technology, 2008, 33(6):41-44.
［7］王孝培.冲压手册[M].北京：机械工业出版社， 2004.Wang X P. Pressing of Manual[M]. Beijing: China Machine Press, 2004.
［8］成虹.冲压工艺与模具设计[M].北京：高等教育出版社，2006.Cheng H. Pressing Technology and Mould Design[M]. Beijing: Higher Education Press, 2006.
［9］刘显东，张永安，李锡武，等.B95оч铝合金的热变形行为研究[J]. 稀有金属，2012，36(5)：687-693.Liu X D, Zhang Y A, Li X W, et al. Hot deformation behavior of B95оч aluminum alloy [J].Chinese Journal of Rare Metals, 2012，36(5): 687-693.
［10］杨立宏.发动机隔热罩成形工艺分析与模具设计[J].模具工业，2012，38(5)：34-37.Yang L H. Analysis of forming process and design of die forthermal shield of automobile engine[J]. Die & Mould Industry, 2012, 38(5):34-37.
［11］刘昌棋.油箱壳体冲压工艺与模具设计[J].模具工业,2011,37(5):29-33.Liu C Q. Fuel tank shell punching process and die design[J]. Die & Mould Industry, 2011, 37(5):29-33.

Service：

【This site has not yet opened Download Service】【Add Favorite】