［1］谢英,万敏,韩非.板料成形极限应变与极限应力的转换关系[J]. 塑性工程学报,2004,6 (3) :55-58.  Xie Y, Wan M , Han F. Forming limit strain and ultimate stress conversion relationship[J]. Plasticity Engineering,2004,6 (3) :55-58.
［2］曹宏深. 复合变形路径下的板材冲压成形极限应变(Ⅰ):冲压成形极限应变的立论与解析[J]. 机械工程学报, 2008, 44(2): 54-61. Cao H S. Limit strains of sheet metal forming under broken-line strain paths(Ⅰ):Proposing and analyzing on the limit strains for sheet metal forming[J].  Chinese Journal of Mechanical Engineering, 2008, 44(2): 54-61.
［3］韩非,万敏,吴向东. 板料成形极限理论与实验研究进展[J]. 塑性工程学报,2006,10 (5) :80-86. Han F, Wan M, Wu X D. Sheet metal forming limit theory and experimental research[J].  Plasticity Engineering,2006,10 (5):80-86.
［4］陈劼实, 周贤宾. 板料成形极限的理论预测与数值模拟研究[J].  塑性工程学报, 2004, 11 (1) :13-17.Chen J S, Zhou X B. The theoretical prediction and numerical simulation of sheet metal forming limit [J].  Journal of Plasticity Engineering, 2004, 2 (11):13-17.
［5］Peters W, Ranson W. Digital imaging techniques in experimental stress analysis[J].  Optical Engineering, 1982, 21 (3): 427-431.
［6］James K W. None contact machine vision metrology within a CAD coordinate system[A].Proceedings of Autofactc's 88 Conference[C]. Chicago Illinois, 1988.
［7］刘凤梅,段发阶,叶声华.一种新的高精度的线结构光传感器标定方法[J]. 天津大学学报,1999,32(5):547-550.Liu F M, Duan F J, Ye S H. New accurate calibrating technique for the light-strip sensors[J]. J.Tianjin University,1999,32(5):547-550.
［8］魏振忠,张广军,徐园.一种线结构光传感器标定方法[J]. 机械工程学报,2005,41(2):210-214. Wei Z Z, Zhang G J, Xu Y. Calibration approach for structured lighted stripevision sensor[J].  Chin.J.Mechanical Engineering, 2005, 41(2):210-214.
［9］Sutton M A,Cheng  M, Peters  W H, et al. Application of an optimized digital correlation method to planar deformation analysis[J].  Image Vision Comput., 1986, 4 (3): 143-150.
［10］周富强，张广军.表面视觉传感器模型参数的简易标定方法[J]. 机械工程学报，2005，41(3)：175-179.  Zhou F Q, Zhang G J. Facilitated method to calibrate model parameters of vision sensor for surface measurement[J]. Chinese Journal of Mechanical Engineering, 2005, 41(3)：175-179. 
［11］周富强, 张广军, 魏振忠, 等. 基于未知运动一维靶标的双目视觉传感器标定[J].  机械工程学报, 2006, 42(6): 92-96. Zhou F Q, Zhang G J, Wei Z Z, et al. Calibrating binocular vision sensor with onedimensional target of unknown motion [J].  Chinese Journal of Mechanical Engineering, 2006, 42(6): 92-96.
［12］孙军华, 吴子彦, 刘谦哲, 等. 大视场双目立体视觉传感器的现场标定[J].  光学精密工程, 2009, 17 (3): 633-640. Sun J H, Wu Z Y, Liu Q Z, et al. Field calibration of stereo vision sensor with large FOV [J]. Optics and Precision Engineering, 2009, 17 (3): 633-640.
［13］胡浩, 梁晋, 唐正宗, 等. 大视场多像机视频测量系统的全局标定[J].  光学精密工程, 2012, 20 (2): 369-378. Hu H, Liang J, Tang Z Z, et al. Global calibration for muti-camera videogrammetric system with large-scale field of view [J]. Optics and Precision Engineering, 2012, 20 (2): 369-378.
［14］GB/T 24171.1-2009, 金属材料 薄板和薄带 成形极限曲线的测定 第1部分:冲压车间成形极限图的测量及应用[S]. GB/T 24171.1-2009, Metallic materials. Sheet and strip. Determination of forming limit curves. Part 1:Measurement and application of forming limit diagrams in press shop[S].
［15］GB/T 24171.2-2009，金属材料 薄板和薄带 成形极限曲线的测定 第2部分:实验室成形极限曲线的测定[S]. GB/T 24171.2-2009, Metallic materials. Sheet and strip. Determinations of forming limit curves. Part 2:Determinations of forming limit curves in laboratory[S].
［16］郑静风,李少平,何丹农. 板料成形中新型润滑方法研究[J].   锻压技术,2003,6 (3) :62-64. Zeng J F, Li S P, He D N. Sheet metal forming new lubricating method[J].   Forging & Stamping Technology, 2003,6(3):62-64.