［1］周济.制造业数字化智能化[J].中国机械工程，2012,23(20):2395-2400.Zhou J. Digitization and intellectualization for manufacturing industries[J]. China Mechanical Engineering, 2012,23(20) :2395-2400.
［2］路甬祥.走向绿色和智能制造[J].中国机械工程,2010,21(4) :379-386.Lu Y X. Go green and intelligent manufacturing[J]. China Mechanical Engineering, 2010, 21(4):379-386.
［3］中国机械工程学会. 中国机械工程技术路线图[M], 北京：中国科学技术出版社，2011.Chinese Mechanical Engineering Society.Technology RoadMaps of Chinese Mechanical Engineering[M]. Beijing: China Science and Technology Press, 2011.
［4］王智文.汽车轻量化技术发展现状初探[J].汽车工艺与材料,2009,(2) :1-5.Wang  Z W. Lightweight automotive technology development status of the[J].Automobile Technology & Material, 2009,(2):1-5.
［5］陈建军. 内高压工艺及其在汽车轻量化中的应用[J].锻压装备与制造技术,2010,(1) :12-17.Chen J J. Hydroforming technology and its application in weight-lightening process for automobile[J]. China Metal Forming Equipment & Manufacturing Technology, 2010,(1):12-17.
［6］张凯锋.《锻压技术》杂志纵横谈[J]. 锻压技术，2010,35（1）:1-3.Zhang K F. Comprehensive of  Forging & Stamping Technology[J]. Forging & Stamping Technology, 2010,35(1):1-3.
［7］王仲仁，滕步刚，汤泽君.塑性加工技术新进展[J].中国机械工程,2009,20(1) :108-112.Wang Z R, Teng B G, Tang Z J. New development on technology of plasticity[J]. China Mechanical Engineering, 2009,20(1) :108-112.
［8］宋拥政，齐俊河. 中国金属成形行业的发展[J].锻压装备与制造技术,2009,(2) :13-19.Song Y Z, Qi J H. The development of the metal forming industry in China[J]. China Metal Forming Equipment & Manufacturing Technology, 2009,(2):13-19.
［9］刘华，闫洁，刘斌. 现代塑性加工新技术及发展趋势[J].锻压装备与制造技术,2010,(4) :10-14.Liu H,Yan J,Liu B. New technology and developing trend of modern plastic forming for metal[J]. China Metal Forming Equipment & Manufacturing Technology, 2010, (4):10-14.
［10］刘振堂. 我国锻压机械行业现状概况[J].锻压装备与制造技术,2011,(4) :9-15.Liu Z T. Status of national metalforming machinery industry[J]. China Metal Forming Equipment & Manufacturing Technology, 2011,(4):9-15.
［11］杨固川，于江，陈文，等.大型模锻液压机的工作压力及工作缸布置分析[J]. 锻压技术，2011,36（3）:77-79.Yang G C, Yu J, Chen W, et al. Analysis of hydraulic working pressure and arrangement of main working cylinder for large close\|die forging press[J]. Forging & Stamping Technology, 2011,36(3):77-79.
［12］孙友松，刘艳.材料加工技术创新与汽车轻量化[J]. 锻压技术，2007,32（5）:1-7.Sun Y S, Liu Y. Innovation in forming technologies and lightweight cars[J]. Forging & Stamping Technology, 2007,32(5):1-7.
［13］张长龙，邱林弟.锻锤在现代锻造工业中的复兴[J]. 锻压技术，2004,29（2）:53-55.Zhang C L, Qiu L D. Hammer in the revival of the modern forging industry[J]. Forging & Stamping Technology,2004,29(2):53-55.
［14］高俊峰.我国快锻液压机的发展与现状[J]. 锻压技术，2008,33（6）:1-5.Gao  J F. Resent status and development of high\|speed forging hydraulic press in our country[J]. Forging & Stamping Technology,2008,33(6):1-5.
［15］张营杰，卫凌云，牛勇.锻造操作机发展现状与研究方向[J].锻压装备与制造技术,2012,(2) :11-13.Zhang Y J, Wei L Y, Niu Y. Developing status and trend of forging manipulator[J]. China Metal Forming Equipment & Manufacturing Technology,2012,(2):11-13.
［16］王玉山. 伺服机械压力机发展状况[J].锻压装备与制造技术,2010,(1) :29-31.Wang Y S. Status of development for servo mechanical press[J]. China Metal Forming Equipment & Manufacturing Technology,2010,(1):29-31.
［17］白宏伟，赵立伟，王玉成. 镁合金热塑性成形技术的研究现状[J].锻压装备与制造技术,2009,(2) :20-22.Bai  H W, Zhao L W, Wang Y C. The research of warm hydro\|forming process of agnesium alloys[J]. China Metal Forming Equipment & Manufacturing Technology,2009,(2):20-22.