Transactions of Materials and Heat Treatment

Title：Forging characteristics and process of high manganese non-magnetic steel retaining ring

Authors： ZENG Yan-ling

Unit： Sichuan Information Occupation Technical College

KeyWords： high manganese non-magnetic steel retaining ring forging quality of retaining ring

ClassificationCode：TG316;G718.5

year,vol(issue):pagenumber：2013,38(3):12-14

Abstract：

The forging process requirement of high manganese steel retaining ring is relatively high.According to the forging characteristics of high manganese steel retaining ring, the forging process development and improving measures were put forward. After trial production, the satisfied effect was obtained. By carrying out the improved forging process in the factory,the influence of forging characteristics for high manganese steel on forging process was reduced,the internal and appearance qualities of retaining ring and the tooling life were improved, and the heating number and energy consumption were reduced.

Funds：

Reference：

［1］机械工业职业技能鉴定中心. 高级锻造工技术[M]. 北京：机械工业出版社，1999.Machinery Industry Occupation Skill Identification Center. Advanced Forging Technology[M]. Beijing: China Mechancal Industry Press, 1999.
［2］机械工业技师考评教材编审委员会. 锻造工技师培训教材[M]. 北京：机械工业出版社，2001.Machinery Industry Technician Test Teaching Materials Compilation Committee. Forging Technician Training Materials [M]. Beijing: China Mechanical Industry Press, 2001.
［3］杨建辉. Mn18Cr8无磁护环的锻造技术[J]. 大型铸锻件. 1989,(3):47-48.Yang J H. Mn18Cr18 without magnetic retaining ring forging technology [J]. Large Casting and Forging,1989, (3): 47-48.
［4］吕炎. 锻造工艺学[M].北京：机械工业出版社，2011.Lu Y. Forging Technology [M].Beijing: China Mechanical Industry Press, 2011.
［5］机械工程手册编辑委员会. 机械工程手册[M].北京：机械工业出版社，1978.Editorial Committee of Mechanical Engineering Handbook. Mechanical Engineering Handbook [M]. Beijing: Mechanical Industry Press, 1978.
［6］机械类通用教材编审委员会. 锻工工艺学[M].北京：机械工业出版社,1979.Mechanical Universal Textbook Review Committee. Forge Technology [M]. Beijing: Mechanical Industry Press, 1979.
［7］顾利. 电动机护环的锻造[J]. 锻造与冲压，2011,(4):48-50.Gu L.Motor retaining ring forging[J].Forging and Metalforming, 2011, (4): 48-50.
［8］刘润广. 锻造工艺学[M].哈尔滨：哈尔滨工业大学出版社，1992.Liu R G. Forging Technology [M]. Harbin: Harbin Institute of Technology Press, 1992.
［9］中国锻压协会. 锻造工艺模拟[M].北京：国防工业出版社，2009.China Forging Association. Forging Process Simulation[M]. Beijing: National Defence Industry Press, 2009.
［10］李剑，李新生，张华.一种整锻六拐曲轴的锻造工艺方法[J]. 锻压技术. 2004 ,29(2):10-11.Li J , Li X S, Zhang H. Solid forging process of the forging of a crankshaft with six flexures [J] .Stamping and Forging Technology, 2004, 29 (2): 10-11.

Service：

【This site has not yet opened Download Service】【Add Favorite】