Transactions of Materials and Heat Treatment

Title：Dynamics analysis for drive system of forging hydraulic press based on AMESim

Authors： ZENG Xiao-feng HUANG Ming-hui

Unit： State Key Laboratory of High Performance Complex Manufacturing Central South University Changsha 410083 China

KeyWords： forging hydraulic press AMESim simulation model dynamic characteristic

ClassificationCode：TG391.9

year,vol(issue):pagenumber：2012,37(6):60-63

Abstract：

Forging hydraulic press system is a multi-parameter nonlinear system with many parameters，and it is difficult to establish a precise mathematical model to be studied. Based on AMESim ,which is an advanced modeling and simulation platform for systems，a simulation model for the drive system of Y32315T fourcolumn hydraulic press was established. This model was confirmed by experiment. And then the step response of the system was analyzed by simulation. The result of the simulation shows that the response speed of the system is very fast and the system has a good dynamic quality.

Funds：

国家973重点基础研究发展计划资助项目（2011CB706802）

Reference：

［1］王春喜，张玉水.航空工业的发展与模锻件的需求[J].锻压机械，1997，(5)：3-5.
［2］杨固川，于江，陈文,等.大型模锻液压机工作介质的选择及系统技术方案分析研究[J].锻压技术，2011，36（1）：73-77.
［3］俞新陆.液压机的设计与应用[M].北京:机械工业出版社,2006.
［4］管国栋，吴爱国，李长滨,等.80 MN锻造液压机液压控制系统的研制[J].锻压技术，2011，36(3)：87-90.
［5］史国亮, 孙友松, 黎勉,等.1100 kN伺服曲柄压力机控制系统研究[J].锻压技术，2009，34(2)：79-82.
［6］Imagine Company. AMESim 4.2 User Manual[M].France：Imagine S.A.,2004.
［7］付永领，祁晓野.AMESim系统建模和仿真——从入门到精通[M].北京:航空航天大学出版社，2006.
［8］陆元章.液压系统的建模与分析[M].上海：上海交通大学出版社，1989.
［9］胡国良，龚国芳，杨华勇，等. 盾构掘进机推进液压系统压力流量复合控制分析[J].煤炭学报，2006,31(1):125-128.
［10］黄长征. 300 MN模锻液压机动梁驱动系统动态响应特性及速度控制研究[D]. 长沙：中南大学，2007.

Service：

【This site has not yet opened Download Service】【Add Favorite】