Transactions of Materials and Heat Treatment

Title：Investigation on rationality of high-|efficient precision and batch production process for spline shaft

Authors： LI Yong-yi ZHAO Sheng-dun SUN Zhen-yu FAN Shu-qin

Unit： Xi'an Jiaotong University

KeyWords： spline shaft production process cutting plastic forming

ClassificationCode：TG335

year,vol(issue):pagenumber：2012,37(3):1-6

Abstract：

Spline shaft parts are widely applied in the industry of automotive, aerospace and engineering machinery, etc.. The new challenge to the current production process and production capacity of spline shaft part is put forward for the rapid increase of demand and continuous enhancement of requirement. The existing production process of spline shaft part was analyzed, including cutting process and plastic forming process. The new development of production process of spline shaft part was introduced and the main task of developing the advanced production process of spline shaft part in the future was pointed out. The rationality of high\|efficient precision and batch production process of spline shaft part finally was discussed.

Funds：

国家自然科学基金资助项目（50975222）

Reference：

［1］关文达. 汽车构造[M]. 3版.北京: 机械工业出版社, 2010.
［2］陈国定, 陈晓南.机械设计基础[M]. 北京: 机械工业出版社,2005.
［3］崔凤奎, 李言, 李春梅. 渐开线花键加工方法进展[J]. 矿山机械, 2007, 35(2): 116-119.
［4］张兴旺, 刘志奇, 李永堂. 渐开线花键的冷滚压精密成形工艺研究[J]. 电加工与模具,2009,(增刊): 52-54.
［5］邱宣怀. 机械设计[M].3版.北京: 高等教育出版社, 1989.
［6］中汽协会行业信息部. 2011年12月汽车工业产销情况简析[EB/OL]. [20120112]. http:∥www.caam.org.cn/zhengche/20120112/1605066964.html.
［7］张接信. 小模数渐开线花键轴冷挤压成形工艺[J]. 工程机械, 2006, 37(10): 57-60.
［8］张凤宽, 门连通. 渐开线齿外花键开式冷挤压的理论模型与工艺参数的研究[J]. 锻压装备与制造技术, 2006, (3):95-97.
［9］黄朝晖, 付沛福, 黄良驹，等. 花键轴开模冷挤压中局部徽粗问题的研究[J]. 塑性工程学报, 1999, 6(3): 12-17.
［10］伍太宾, 王屹. 汽车变速器渐开线齿形花键轴的冷挤压成形技术[J]. 汽车技术, 2006, (7): 32-35.
［11］徐虹, 贾树盛, 白凤梅，等. 基于数值模拟的渐开线花键件冷挤压工艺参数优化[J]. 塑性工程学报, 2005, 12(6): 7-10.
［12］吴修义. 小模数渐开线花键滚打轮的设计特点[J]. 机械工程师, 1997, (1): 15-16.
［13］张光裕. 渐开线花键冷滚挤成形[J]. 制造技术与机床, 2003, (1): 58-61.
［14］孙十宝, 崔世强, 高才良，等. 渐开线冷搓成形模具设计及制造[J]. 锻压技术, 1999,14 (4):43-46.
［15］孙士宝, 崔世强, 高才良，等. 渐开线花键冷搓成形工艺中咬入条件的建立[J]. 锻压技术, 1999,14 (3): 35-37.
［16］王心海. 冷搓小模数渐开线花键轴齿板的设计[J]. 工具技术, 2001, 35(10): 27-28.
［17］王志奎. 以Deform\|3D实现花键轴精密冷滚轧成形模拟[J]. 现代制造工程, 2009, (9): 58-61.
［18］Neugebauer R, Putz M, Hellfritzsch U. Improved process design and quality for gear manufacturing with flat and round rolling[J]. Annals of the CIRP, 2007, 56(1): 307-312.
［19］Reimund Neugebauer, Dirk Klug, Udo Hellfritzsch. Description of the interactions during gear rolling as a basis for a method for the prognosis of the attainable quality parameters[J]. Prod. Eng. Res. Devel., 2007, (1): 253-257.
［20］何枫. 小模数渐开线花键滚轧轮的设计[J]. 工具技术, 2001, 35(2): 23-25.
［21］金良. 小模数渐开线花键滚轧轮的设计及制造[J]. 金属成形工艺, 2002, 20(2): 50-52.
［22］吴卫华. 渐开线花键滚轧的加工问题[J]. 机械工人：冷加工, 2004, (12): 2-6, 37.
［23］林晓磊, 贺云花, 石磊. 用冷滚轧方法加工小模数花键[J]. 机械工程师, 2004,(7):45-47.
［24］王明福, 付建华, 刘志奇，等.花键冷滚压成形过程有限元分析[J]. 锻压技术, 2010, 35(4):155-159.
［25］崔凤奎, 李言, 周彦伟，等.渐开线花键轴冷滚轧工艺试验[J].农业机械学报, 2006, 37(12):189-192.
［26］王晓强, 徐红玉, 崔凤奎，等.花键冷滚轧成形的有限元模拟[J].矿山机械,2007, 35(9):139-141.
［27］孙娟, 徐永福, 胡向军，等. 冷滚打花键动力学分析与仿真[J]. 机械设计与制造, 2009, (4):196-198.
［28］Escofier. Spline rolling[EB/OL]. [2011-12-20]. http:∥www.escofier.com/roulage_cannelures.php.
［29］GROB. Cold Rolling Machine GROB ZRMe 12[EB/OL]. [2011-12-20]. http:∥www.machineseeker.com-ang_hi/A829991.html.
［30］Felss GmbH. Axial forming [EB/OL]. [2011-12-20]. http:∥www.felss.com/topic/axial-forming/.
［31］Profiroll Technologies GmbH. Spline rolling technology: External profiles[EB/OL]. [2011-12-25]. http:∥www.profiroll.de/en/gear-spline-rolling-technology/external_profiles/.
［32］KINEFAC CORPORATION. Spline rolling process[EB/OL]. [2011-12-25]. http:∥www.kinefac.com/p-process-02-spline-rolling.html.

Service：

【This site has not yet opened Download Service】【Add Favorite】