Transactions of Materials and Heat Treatment

Title：Experimental research on joint strength of solid rivet and bolt

Authors：

Unit：

KeyWords：

ClassificationCode：TG386

year,vol(issue):pagenumber：2012,37(1):70-72

Abstract：

Steel sheets were joined by bolts and solid rivets. The best rivet height for solid rivet was obtained by simulating the riveting process in Deform software. The joint strength under lap shear load and coach peel load for solid riveting and bolt connection were analyzed. The tensile tests of solid riveting and bolt connection were done. The results show that the shear strength of bolt connection is a litter higher than those of solid riveting, and the strip strength of bolt connection is significantly higher than those of solid riveting.

Funds：

国家自然科学基金资助项目(50965006）；江西省主要学科学术和技术带头人培养计划（20113BCB22010）

Reference：

［1］黄志超.板料连接技术进展[J].锻压技术,2006,31(4):119-122.
［2］黄志超.实心铆钉自冲铆接数值模拟及参数优化[J].锻压技术,2009,34(3)：68-71.
［3］冯晓旻,谢兰生.铆接变形的有限元分析[J].机械制造与研究，2009,38 (2):62-63, 80.
［4］刘平,李原,张开富，等.压铆过程阶段划分与压铆力计算[J].机械科学与技术，2009,28(4):514-521.
［5］王贤宙,王长武. 基于振动试验的典型铆接形式仿真建模方法研究[J].电子机械工程,2010,26(4):57-64.
［6］Li B, Fatemi A.An experimental investingation of deformation and fatigue behaveor of coach peel riveted joints[J]. International Journal of Fatigue, 2006, 28:9-18.
［7］郁大照，陈跃良.螺接搭接件的载荷传递特性试验及三维有限元分析[J].中国机械工程,2010,21 (19):2273-2277.
［8］尹益辉,余绍蓉.螺栓啮合螺纹段的轴力、等效应力分布及摩擦的影响分析[J].机械强度,2006,28(4):524-531.
［9］黎永钧,于光.高强度螺栓的静强度断裂分析[J].西安交通大学学报,1985,19(3):29-40.
［10］钟国辉.螺栓连接的冷成型钢结构的结构性能[J].建筑钢结构进展,2007,9(1):18-29.
［11］Sanat Wagle,Hiroshi Kato.Ultrasonic detection of fretting fatigue damage at bolt joints of aluminum alloy plates[J]. International Journal of Fatigue, 2009, 31:1378-1385.

Service：

【This site has not yet opened Download Service】【Add Favorite】