Transactions of Materials and Heat Treatment

Title：Primary study on bimetal tube preparation with die less drawing process

Authors： WANG Hui-feng HAN Jing-tao NAI Xiao-wen

Unit： University of Science and Technology Beijing

KeyWords： bimetal tube die less drawing induction heating mechanical bond

ClassificationCode：TH164;TG356

year,vol(issue):pagenumber：2011,36(6):38-41

Abstract：

At present, bimetal tube has been used wildly in the industrial production and there are many methods for preparing these kinds of tubes. In consideration of deficiencies of available methods, a new technique of bimetal tube preparation was presented. With appropriate design and manufacture of facility and design of experiment, copper clad steel tube was prepared. Feasibility and practicability were discussed.

Funds：

Reference：

[1]巢鹏飞, 杨连发, 于强, 等. 塑性成形技术在金属复合管制备中的应用及展望[J]. 塑性工程学报, 2005,12(2) :43-49.

[2]涂厚道，周庆升，王先进.复合管生产综述[J]. 焊管，1996,19(6):5-9.

[3]谷霞, 张安义, 秦建平.双金属复合管塑性复合成形工艺及应用[J]. 精密成形工程，2011，3（3）:46-50.

[4]赵卫民. 金属复合管生产技术综述[J]. 焊管，2003,26 (3) :10-14.

[5]陈明微，蔡体刚.国外双金属复合钢管生产概况[J].钢管，1997,26(6) :23-28.

[6]王忠堂，栾瑰馥，白光润.管材无模拉伸力能参数刚塑性有限元分析[J].沈阳工业学院学报，1999,18(3) :11-15.

[7]黄贞益, 王萍, 孔维斌，等. 无模拉伸工艺及发展[J].华东冶金学院学报，2000,17 (2) :118-121.

[8]夏鸿雁，栗瑰馥，吴迪. 一种新型的锥形管无模拉伸成形方法[J].锻压技术，2009, 34(4) : 25-27.

[9]Bihamta R,Buia Q H, Guillota M,et al. A new method for production of variable thickness aluminum tubes: Numerical and experimental studies[J]. Journal of Materials Processing Technology, 2011,(211): 578-589.

[10]Furushima T, Manabe K, Experimental and numerical study on deformation behavior in dieless drawing process of superplastic microtubes[J]. Journal of Materials Processing Technology, 2007, (191):59-63.

Service：

【This site has not yet opened Download Service】【Add Favorite】