Transactions of Materials and Heat Treatment

Title：Temperature field simulation and experiment research of high speed press

Authors： WANG Lei KE Zun-mang JIA Fang WANG Xing-song

Unit： Southeast University Jiangsu Xuzhou MetalForming Machine Group Co. Ltd.

KeyWords： press temperature field finite element method

ClassificationCode：TG315.5

year,vol(issue):pagenumber：2011,36(4):80-84

Abstract：

The thermal boundary conditions of the high speed press were determined by calculating the heat generate resources and coefficient of heat transfer based on obtaining kinetic and dynamic parameters of the press. The finite element method was used to develop the thermal model of the press, and the changes of temperature distribution were studied. The results of the calculation and experiment show that the thermal FEM model can simulate properly the temperature distribution of the press during its operation.It provides the numerical analysis and experimental research basis for the press thermal error analysis design and experiment research.

Funds：

江苏省科技成果转化项目（BA2008030）

Reference：

[1] Popa M S.Advanced thermal measurements of modern manufacturing systems[A]. XIX IMEKO World Congress: Fundamental and Applied Metrology[C]. Lisbon, 2009.

[2] Zhao H T, Yang J G, Shen J H.Simulation of thermal behavior of a CNC machine tool spindle[J]. International Journal of Machine Tools & Manufacture, 2007,47:1003-1010.

[3] Creighton E, Honegger A, Tulsian A, et al.Analysis of thermal errors in a high speed micro milling spindle[J]. International Journal of Machine Tools & Manufacture, 2010,50：386-393.

[4] Xu Min, Jiang Shuyun, Cai Ying.An improved thermal model for machine tool bearings[J].International Journal of Machine Tools & Manufacture, 2007,47:53-62.

[5] 洪有为, 孙蓓蓓, 惠兰，等.龙门式加工中心C轴系统瞬态温度场建模与仿真[J].东南大学学报:自然科学版, 2005，35（2）: 235-238.

[6] 王金生, 姚春燕, 彭伟.XK717数控铣床主轴系统的热特性分析[J].机床与液压, 2005，(4): 16-17.

[7] 杨建国, 薛秉源. CNC 车削中心热误差模态分析及鲁棒建模[J].中国工程机械, 1998，(9): 31-35.

[8] 毕运波, 方强, 董辉跃，等.航空铝合金高速铣削温度场的三维有限元模拟及试验研究[J].机械工程学报, 2010，46（7）: 160-165.

[9] 陈明, 袁人炜, 凡孝勇，等.三维有限元分析在高速铣削温度研究中应用[J].机械工程学报，2002，38（7）: 76-79.

[10] 王霖, 葛培琪, 秦勇，等.基于有限元法的湿式磨削温度场分析[J].机械工程学报，2002，38（7）: 155-158.

[11] 鹿新建, 柯尊芒, 朱思洪，等.高速精密压力机下死点精度研究[J].锻压技术, 2010，35(1): 87-92.

Service：

【This site has not yet opened Download Service】【Add Favorite】