Transactions of Materials and Heat Treatment

Title：Mechanism design for active moveable stripper on high speed hole perforating press

Authors： DONG Zhen-hua

Unit： Soenen Nico(Beijing) Technology Co. Ltd.

KeyWords： high\|speed perforating press thin plate perforation eccentric shaft

ClassificationCode：TG376

year,vol(issue):pagenumber：2011,36(2):83-86

Abstract：

In order to solve the problems that the perforated sheet normally has, such as deformation on surface, size expansion, bad flatness, and bridges break, the current perforating press was studied. The mainshaft was improved with a new design of adding a new active hold\|down function, thus the above problems could be prevented completely.

Funds：

Reference：

［1］孙凤勤.冲压与塑压成形设备[M].北京：高等教育出版社，2003.
［2］张正修. 导板式冲模技术及应用[M].北京:机械工业出版社,2006.
［3］何德誉.曲柄压力机[M].北京:机械工业出版社, 1987.
［4］Nick Tarkany. Stamping basics[EB/OL]. http://www.daytonprogress.com/tech/dayton_tech\|stamping.pdf.2003.
［5］师后龙，何光军, 鹿新建,等，曲柄压力机的传动系统及发展趋势[J].锻压装备与制造技术，2010, 45(4):14-16.
［6］鹿新建，柯尊芒，朱思洪，等.多连杆高速压力机滑块运动曲线研究[J].锻压技术, 2010, 35(4), 90-94.
［7］郗向儒, 蔺海鸥, 黄朝阳. 高速压力机曲柄滑块机构运动的仿真研究[J].重型机械, 2005, ( 3) : 2829, 3-4.
［8］郑建荣.ADAMS-虚拟样机技术入门与提高[M]. 北京:机械工业出版社,2002.
［9］马闯.肘杆式数控冲床的分析与优化[D].南京航空航天大学, 2007.
［10］郎玲,孙健. 蓄能器的功能简述[J]. 一重技术, 2008, (4):44-45.

Service：

【This site has not yet opened Download Service】【Add Favorite】