Transactions of Materials and Heat Treatment

Title：Design and development of open CNC press control system

Authors： XIONG Jian-qiao XIONG Xiao-song LI Xue YUAN Xin-fang

Unit： Nanjing Institute of Technology Wuhan University of Science and Technology

KeyWords： CNC System open system

ClassificationCode：TG335

year,vol(issue):pagenumber：2010,35(4):77-81

Abstract：

Using CNC press is a development trend of pressure processing industry. It has characteristics of good processing quality and high efficiency. An open architecture system of the CNC press control system was put forward，the basic functions of the open architecture CNC press control system were set forth, the system`s hardware configuration and control system`s software design methods of this open CNC press control system were given. Finally, the validity and applicability of this design were illustrated by practical application examples. The results show that it is an open CNC press control system with simple structure, functional and practical and relatively higher cost performance.

Funds：

南京工程学院基金项目（KXJ8133）；江苏高校科研成果产业化推进项目（JHZD09-15）

Reference：

［1］阳林. 数控压力机CNC系统的研究[J]. 工业工程，1995,（2）:16-21.
［2］黄才元. 我国冲压设备的现状与发展[J]. 机械工人：热加工,2007,（4）:23-25.
［3］Stephen J R, Yung C S.Modeling and control of CNC machines using a PC-based open architecture controller[J]. Mechatronics, 1995,13(4):401-420.
［4］Frederick M, James S A. Open-architecture controllers
［J］.IEEE Spectrum,1997,34(6):60-64.
［5］叶伯生,杨叔子,彭炎午.基于IPC的开放体系结构的CNC系统[J].华中理工大学学报,1996,24(5):47-49.
［6］朱国力,冯清秀,黄胜,等.基于工业PC的数控系体系结构研究[J]. 机械工业自动化，1995，17(2):25-27.
［7］廖效果. 数控技术[M]. 武汉:湖北科学技术出版社，2000.
［8］陈金成,杨海威,钟廷修.一种开放式体系结构经济型数控装置的研制[J].上海交通大学学报,2001,(12):1861-1864.
［9］林亨，韩志宏，钟约先,等.Windows NT环境下CNC冲压机监控系统实时多任务控制的实现[J]. 锻压技术,1999,24(4):39-42.
［10］林峰，刘家绵，乌少龙，等. 机床开放式数控系统的研究[J]. 机床与液压,2004,(4):112-115.

Service：

【This site has not yet opened Download Service】【Add Favorite】