Abstract:
|
The new technics for upsetting a cylinder between two cone platens can improve the cylinder's internal stress and uniform its deformation. These functions are good for closing internal defects, especially for cavities. To get quantitative analysis of this new technics, the software of ANSYS is employed, and the whole deforming process of this technics is simulated. Modeling simplification and parameters selection are introduced. The distribution of internal strain and stress with different height reduction are given, analyzed and compared with that of flat platens upsetting. The analysis results prove that this new technics is important for enhancing internal stress and strain, and the mechanical model of the new theory is verified quantitatively. It is important to complete and perfect the theory.
|
Funds:
|
教育部博士点基金项目(96021603)资助
|
AuthorIntro:
|
|
Reference:
|
[1]刘助柏,王连东.用锥形板镦粗的新工艺及其力学原理[J].机械工程学报,1994,30(4):8385.
[2]刘助柏.塑性成形新技术及其力学原理[M].北京:机械工业出版社,1995.
[3]SunHuixue,HuJinhua,ShiYanguo.Elasto plasticFEManalysis ofcylinderupsettingbetweentwoflatplatens[J].ChineseJour nalofMechanicalEngineering,1999,12(1):4549.
[4]周纪华,管克智.金属塑性变形阻力[M].北京:机械工业出版社,1989.
[5]邓冬梅.大型锻件锻造新理论与新工艺的数值模拟:[硕士学位论文].秦皇岛:燕山大学,2001.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|