Abstract:
|
In this paper,the effect of the structure of blank-holder on the distribution of blank-holder stress during sheet metal forming has been investigated by numerical simulation and experimental measurement method.The embedded measurement system of contact stresses is established.The results indicate that the contact stresses depends on the structure of blank-holder and the different distribution of contact stresses around the blank-holder can be obtained by reasonably designed blank-holder and the formability of stamped part can be improved.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]Siegert K,Hohnhaus J,Wagner S.Combination of hydraulicmultipoint cushion system and segment-elastic blank-holders[J].SAE 980077.
[2]Doege E,Sommer N.Blank-holder pressure and blank-holderlayout in deep drawing of thin sheet metal[C].AdvancedTechnology of plasticity:Proceeding of the Second Internation-al Conrerance on Technology of Plasticity,1987.
[3]Shulkin Leonid,Jansen S W,et al.Elastic deflection of theblank holder in deep drawing of sheet metal[J].Journal ofMaterials Processing Technology,1996,59(1 2):34 40.
[4]Doege E,Elend L E.Design and application of pliable blankholder systems for the optimization of processes conditions insheet metal forming[J].Journal of Materials ProcessingTechnology,2001,111(1 3):182 187.
[5]Neugebauer R,Leib U,et al.Influence on materials flow indeep drawing using individual controllable draw pins andsmooth blank-holder design[J].SAE 970989.
[6]Ahmetoglu M A,Coremans A,Kinzel G L,et al.Improving draw-ability by using variable blank holder force and pressure in deep draw-ing of round and non-symmetric parts[J].SAE 930287.
[7]Obermeyers J,Majlessi S A.A review of recent advances in theapplication of blank-holder force towards improving the form-ing limits of sheet metal parts[J].Journal of Materials pro-cessing technology,1998,75(1 3):222 234.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|