Abstract:
|
With a lot of advantages,such as saving energy,low forming force,near net shape forming,etc.,semi-solid forming processes are now drawing a great of attention of the industry.The induction reheating process and temperature field of alloy ZL101 are being researched. The effect of all kinds of induction heating process parameters,including the frequency of the inductor,current intensity,heating time,the coil dimension and soaking time,temperature field is analyzed using CAE technique,and the measure to optimize process parameters and uniform temperature field of induction heating is put forward.The comparison between the simulated results and the real measured value shows well coincidence.Thus it can be applied in production.
|
Funds:
|
武器装备预研基金项目(514180401030302)
|
AuthorIntro:
|
|
Reference:
|
[1]Flemings,Spencer D B.Rheological behavior of Sn2 15%Pbin the crystallization range[J].Metallurgical Transactions,1972,3(7):1925 1932.
[2]杨红亮.铝镁硅合金再熔融加热组织演变及半固态成形机理及计算机仿真研究[D].上海:上海交通大学,2003.
[3]谢水生,黄声宏.半固态金属加工技术及其应用[M].北京:冶金工业出版社,1999.
[4]张恒华,等.铝合金半固态感应加热的计算机模拟[J].中国有色金属学报,2001,(2):221 225.
[5]Sebus R,Henneberger G.Experiences using a band-coil and a newacoustic sensor system for inductive heating of aluminium alloys[C].in:Proceedings of the sixth international conference on semi-solid processing of alloys and composites(SSM2000),Unione In-dustriale di Torino,Turin,Italy,2000:259 264.
[6]罗中华.轻合金半固态触变成形工艺参数与模具优化设计[D].上海:上海交通大学,2004.
[7]Dantzig J A,Midson S P.Billet heating for semi-solid forming,in:Proceedings of the second international conference on semi-solid pro-cessing of alloys and composites[J].Massachusetts,1992:107.
[8]Choi J C,Park H J,Kim B M,The influence of induction heating onthe microstructure of A356 for semi-solid forging[J].Journal ofMaterials Processing Technology,1999,87(1 3):46 52.
[9]Jung H K,Kan C G.An induction heating process with coil de-sign and solutions avoiding coarsening phenomena of Al 6%Si3%Cu 0.3%Mg alloy for thixoforming[J].Metallurgical andMaterials Transactions B,1999,30A:2967 2977.
[10]Kapranos P,Gibson R C,Kirkwood D H,Sellars CM.Induction heating and partial melting of high melting pointthixoformable alloys[C].in:Proceedings of the fourth in-ternational conference on semi-solid processing of alloys andcomposites,The University of Sheffield,Sheffield,UK,1996:148 152.
[11]Prikhodovsky A,Hurtado I,Neuschutz D,Gorgeneck H,Bleck W.Si mulation and experi mental investigations of micro-structure coarsening of aluminiumalloys[C].in:Proceed-ings of the sixth international conference on semi-solid pro-cessing of alloys and composites(SSM2000),Unione Indus-triale di Torino,Turin,Italy,2000:521 526.
[12]Davies EJ.Conduction andinduction heating[M].Peter Per-egrinus,London,1990.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|