Abstract:
|
Base on the respective research of stretch spinning process and drawing process,due to the difficulty of machining overlength circular cone pipe and combining the advantages of both,in the paper,a new cold-forming method which is called combined stretch spinning and drawing process is proposed,and the device of combined stretch spinning and drawing process is designed.The combined stretch spinning and drawing process is used without mandrel either to assure good quality product or to increase the working efficiency.On the basis of elastic-plastic theory and using of FEM software-ANSYS,the FEM model of stretching spinning and drawing process is made.The simulation result shows that the circular pipe reduced radially with the union applied force,the axial stress is maximal,the deformation is obvious and the pipe is extended along axial direction.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]王成和,刘克璋.旋压技术[M].北京:机械工业出版社,1986.
[2]温景林.金属挤压与拉拔工艺学[M].沈阳:东北大学出版社,1996.
[3]西安重型机械研究所.LB-Ⅱ型连续拉拔机组投入生产[J].重型机械,1990,(3):54 56.
[4]周照耀.筒形件强旋刚塑性有限元二维模拟及三维初步分析[D].哈尔滨:哈尔滨工业大学,1994.
[5]周照耀,阮锋,吕炎,等.筒形件反旋的三维刚塑性有限元分析[J].锻压技术,1997,(1):29 33.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|