Abstract:
|
The drawing process without BHF of shallow square boxes with larger corner radius was simulated by FEM technology and its results are analyzed and compared with tests. The rule that blank corner dimensions influence on the height shaped during the drawing process of square boxes is investigated. The results indicate that in order to ensure the pre-shaped height of parts formulas with correction should be used when the unfold sizes of blank are calculated.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
1 王孝培冲压手册北京:机械工业出版社,1990
2 汪富钧无凸缘方盒形件拉深成形最佳工艺参数锻压机械,1994,(6):28~30
3 彭颖红金属塑性成形仿真技术上海:上海交通大学出版社,1999
4 肖作义,左虹,张涛,等盒形件拉深毛坯合理轮廓线的确定锻压机械,1995,(6):19~20
5 DnaformPCuser smanualmay,1999(1)
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|