Transactions of Materials and Heat Treatment

Title：Trimming and piercing die design for friction press

Authors： LIU Geng-wu ZHONG Zhen-long(Department of Mechanical and Electrical Engineering Hunan Railway Professional Technology College Zhuzhou 412001 China)

Unit：

KeyWords： friction press trimming and piercing strike force positioning

ClassificationCode：TG315.6;TG315.2

year,vol(issue):pagenumber：2007,32(3):70-71

Abstract：

The friction press is a typical forging and pressing equipment,which is mainly used for forging production and seldom for trimming and piercing work.However,it may meet this kind of application during the production practice.Some points of trimming and piercing die design for the friction press,such as the structure mode selection of the die,control of strike force,the size design of strike block,position of upper and lower die and related notices,etc.were introduced.

Funds：

湖南铁道职业技术学院K200605项目的阶段成果

Reference：

[1]陈剑鹤.冷冲压工艺与模具设计[M].北京:机械工业出版社,2001.
[2]王孝培.冲压手册[M].北京:机械工业出版社,1990.
[3]俞汉清,陈金德.金属塑性成形原理[M].北京:机械工业出版社,1999.
[4]陈锡栋,周小玉.实用模具技术手册[M].北京:机械工业出版社,2002.
[5]孙凤勤.冲压与塑压设备[M].北京:机械工业出版社,2003.
[6]罗益旋.最新冲压新工艺新技术及模具设计实用手册[M].银声音像出版社,2004.11
[7]王树勋.实用模具设计与制造[M].湖南:国防科技大学出版社,1992.
[8]涂光琪.冲模技术[M].北京:机械工业出版社,2002.
[9]丁松聚.冷冲模设计[M].北京:机械工业出版社,2001.
[10]李岩.2006新编锻模设计实用手册[M].北京:中国知识出版社,2006.4
[11]刘庚武.冷冲压模具设计[M].西安:西安电子科技大学出版社,2007.

Service：

【This site has not yet opened Download Service】【Add Favorite】