Abstract:
|
Punching process was made through analyzing the structural characteristics and technology of torsion beam which was one of auto panels.Considering the forming problems of crack,wrinkle and spring back,drawing process including the drawing direction,shape of binder surface,draw bead and so on,and the structure of drawing die were analyzed.The produced torsion beam and the die show that the punching processes and the die structure are reasonable and feasible.Three-dimensional part modeling and die designing are performed in UG conveniently and quickly.It can show the part relation of the die more actually and reduce the defects of die designing in practice.
|
Funds:
|
江苏省高校自然科学基金资助项目(05KJD460044);;
国家自然科学基金资助项目(50475125)
|
AuthorIntro:
|
|
Reference:
|
[1]郭春生,汤宝骏,孙继明,等.汽车大型覆盖件模具[M].北京:国防工业出版社,1993.
[2]王恒.汽车覆盖件拉伸模的设计现状及发展方向[J].电加工与模具,2001,(2):13-15.
[3]陈炜,李新城,杜生亚,等.汽车覆盖件模具设计方法研究[J].航空制造技术,2005,(8):70-73.
[4]史刚.车覆盖件拉延件设计[J].模具技术,2004,(5):35-39.
[5]顾勇.基于UG的汽车覆盖件拉延模结构参数化设计[J].航空制造技术,2005,(3):75-80.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|