Transactions of Materials and Heat Treatment

Title：Brief analysis of several common failure modes of roller

Authors： LI Zeng-hui1 ZHAO Sheng-dun1 HAN Dong2 ZHANG Li-wu2 ZHANG Guan-hua2 HUA Xiao-yu2(1.Xi′an Jiaotung University Xi'an 710049 China 2.Xi'an Aerospace Power Machine Factory Xi'an 710049 China)

Unit：

KeyWords： roller flow formed part failure

ClassificationCode：TG376

year,vol(issue):pagenumber：2007,32(2):57-60

Abstract：

Roller is one of the major process equipment for the flow forming.It has a significant effect to dimensional precision and apparent quality of the flow formed part.Several common failure modes of roller for the flow forming were analyzed and studied in this paper.The reason of the roller failure was found out and the corresponding measures were set down.

Funds：

Reference：

[1]孙存福,陈企芳.金属强力旋压过程中的粘结现象的实验分析[R].北京:北京航空学院科学研究报告,BH-B756,1982.
[2]李增辉,韩冬.Φ2M钛筒旋压轮开裂失效分析[R].国防科技报告,2000.
[3]许发樾,张晓林.模具材料热处理[M].北京:机械工业出版社,1993.
[4]冯晓曾,王家瑛.何世禹,等编.提高模具寿命指南—选材及热处理[M].北京:机械工业出版社,1994.
[5]夏书敏.Cr12MoV钢旋压成形轮早期断裂失效原因分析[J].金属热处理,2000,25(4),48-50.
[6]刘国翔.旋压轮选材与工艺改进研究[J].江汉大学学报(自然科学版),2003,31(1):71-73.

Service：

【This site has not yet opened Download Service】【Add Favorite】