Abstract:
|
Several typical forming processes of damping spindle sleeve were briefly explained.Based on general finite element software Deform 3D,3D rigid visco-plastic FEM was used to simulate the precision forging process,the laws of material flow and equivalent plastic strain distribution were revealed based on the results of FEM simulation.The process parameters and mould structure for precision damping spindle sleeve forging were optimized.Experiments of damping spindle sleeve precision forging were made,the qualified damping spindle sleeve was formed,and FEM simulation results were verified by experiments.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]Chen H Q,Wang Q.C,Guo H G.Research on the cast-ing-forging precision forming process of alternator poles[J].Journal of Materials Processing Technology,2002,129(10):330-332.
[2]Doege E,Bohnsack R.Closed die technologies for hot forg-ing[J].Journal of Materials Processing Technology,2000,98(1):165-170.
[3]程万军,赵立辉,黄良驹.星形套闭塞冷锻工艺及模具设计[J].模具工业.2003,(3):45-48.
[4]高永超,华林,赵玉民,等.汽车发电机磁极精锻成形三维有限元模拟和工艺优化[J].中国机械工程,2005,16(12):1110-1114
[5]刘建生,陈慧琴,郭晓霞.金属塑性加工有限元模拟技术与应用[M].北京:冶金工业出版社,2003.
[6]吕炎.精密塑性体积成形技术[M].北京:国防工业版社,2003.
[7]赵德颖,孙惠学,张春义.轿车转向节闭塞挤压成形新工艺研究[J].锻压技术,2006,31(2):36-68.
[8]魏志刚,汤文成,刘德仿.星形套冷挤压成形模具结构分析及优化[J].锻压技术,2006,31(4):59-63.
[9]中国机械工程学会锻压学会.锻压手册:第3卷[M].北京:机械工业出版社,1993.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|