Abstract:
|
The formability of tailor-welded blanks(TWBS) decreases because of the transformation of microstructure in heat effect zone.Besides,specific materials can not be precisely positioned because of the weld line movement.According to the specialties of TWBS forming,the traditional drawing dies were modified.The experimental dies were designed with stepped punch and stepped binder.A novel method of predicting weld line movement using inverse analysis method was proposed.The in-house inverse analysis software InverStamp was developed.The comparisons of weld line movement between the one calculated and that of experiment with different process parameters demonstrate that the inverse analysis method can well reflect the tendency of weld line movement.Therefore,inverse analysis method can well reflect the effect of process parameters on weld line movement.
|
Funds:
|
山东建筑大学博士科研启动基金资助项目
|
AuthorIntro:
|
|
Reference:
|
[1]陈炜,杨继昌,朱国璋,等.冲压成形数值模拟在车身制造中的应用研究[R].南京:跃进汽车集团公司,2003.
[2]Saunders FI,Wagoner R H.Forming of tailor-welded blanks[J].Metallurgical and Materials Transactions A(USA),1996,27A(9):2605-2616.
[3]Siegert K,Glasbrenner B,Possehn T.Forming of tailoredblanks with non-linear weld-lines[J].Society of AutomotiveEngineers,2000,(14):27-31.
[4]唐炳涛,赵震,陈军,等.DKT板壳单元及其在一步模拟法中的实现[J].上海交通大学学报,2006,40(10):1641-1644.
[5]Guo Y Q,Batoz J L Naceur H.Recent developments on theanalysis and opti mum design of sheet metal forming parts u-sing a si mplifiedinverse approach[J].Computers and Struc-tures,2000,78(1-3):133-148.
[6]唐炳涛,赵震,陈军,等.改进的一步模拟法及其在板料成形分析中的应用[J].上海交通大学学报,2005,39(11):1763-1766.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|