|
Abstract：
|
|
The multistage incremental forming of vertical wall cylinder always has the characteristics of fussy forming path and complicated parameters setting.In order to achieve uniform thickness of fleet parts and also to improve the forming limit,the theory of multistage incremental forming was added into the pocket forming,and the experiment was designed to form vertical wall cylinder parts with normal pocket forming.After amending the NC program of pocket forming,dispersing the tool location and increasing the cutter lifting,a vertical wall cylinder with radius of 30mm,depth of 27mm and uniform thickness was formed.
|
|
Funds：
|
|
先进数控技术江苏省高校重点建设实验室开放基金项目(KXJ05017)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]松原茂夫.板材の逐次逆张出し.绞り成形[A].平成7年度塑性加工春季讲演会论文集[C].日本:日本塑性加工学会,1995.
[2]周六如,肖祥芷,莫健华.金属直壁筒形件数控渐进成形工艺研究[J].机械科学与技术,2004,23(11):1366-1369.
[3]王莉,莫健华,黄树槐.金属薄板直壁件数字化渐进成形过程的实验研究[J].锻压技术,2004,29(6):9-11.
[4]贾俐俐,高锦张,郑勇,等.金属直壁筒形件数控增量成形工艺研究[J].锻压技术,2006,31(5):133-135.
[5]周六如,肖祥芷,莫健华.板料零件数控渐进成形工艺研究[J].塑性工程学报,2003,10(4):27-29.
[6]Dai Kun,Wang Z R,Fang Yi.CNCincremental sheet form-ing of an axially symmetric speci men and the locus of opti mi-zation[J].Materials Processing Technology,2000,102(1):164-167.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved