Abstract:
|
The forming principle and deformation analysis of NC incremental sheet metal forming process were presented.The process planning,the experiment and the main process parameters of vertical wall square box forming were investigated.The deformation of sheet metal was only made around the tool head and the deformed region was subjected to stretch deformation.Therefore,the sheet metal was thinned,surface area was increased,and sheet metal forming point-by-point led to the whole sheet deformation.The forming half-apex angle θ and corner radius r were the main process parameters of vertical wall square box in NC incremental forming.According to Sine Law,a vertical wall square box can not be finished by NC incremental sheet metal forming process with a single tool-path,it must be formed with multi tool-paths.Thus,the parallel line type tool path process method was presented to make the vertical wall square box,and experiment and analysis were made to verify it.
|
Funds:
|
国家自然科学基金资助项目(50175034)
|
AuthorIntro:
|
|
Reference:
|
[1]Matsubara S A.Computer numerically controlled dieless in-cremental forming of a sheet metal[J].Proceedings of theInstitution of Mechanical Engineers B,Journal of EngineeringManufacture,2001,(215):959-966.
[2]Iseki H.Approxi mate deformation analysis and FEManalysisfor the incremental bulging of sheet metal using a sphericalroller[J].Journal of Materials Processing Technology,2001,1-3(111):150-154.
[3]周六如,肖祥芷,莫健华.板料零件数控渐进成形工艺研究[J].塑性工程学报,2003,10(4):27-29.
[4]Park J J,Ki m Y H.Fundamental studies on the incrementalsheet metal forming technique[J].Journal of Materials Pro-cessing Technology,2003,(140):447-453.
[5]Ambrogio G,De Napoli.Application of Incremental Formingprocess for high customised medical product manufacturing[J].Journal of Materials Processing Technology,2005,(162):156-162.
[6]崔震,高霖,陆启建.数控渐进成型技术在圆孔翻边中的应用[J].机械工程材料,2008,(7):5-8.
[7]贾俐俐,顾雪艳,高锦张,等.金属板料数控增量成形的覆层技术实验研究[J].锻压技术,2007,32(5):26-28.
[8]Kopac J,Kampus Z.Incremental sheet metal forming onCNC milling machine-tool[J].Journal of Materials Process-ing Technology,2005,(162-163):622-628.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|