Abstract:
|
The stress distribution and strength condition of multilayer flat container for extruding aluminium sheet with flange has been simulated by elastic FEM under different extrusion pressure, hole size and shrink fitting range. The results show that the distribution of shrink fitting pressure is not uniform on the shrink fitting interface, the allowed maximum extrusion pressure is 500MPa with present container of hole size 850mm×250mm and 600MPa with which the hole size being changed into 850mm×320mm.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
1刘静安,赵云路编著.铝合金生产关键技术.重庆:重庆大学出版社,1997.2刘静安编著.挤压模具技术的理论与实践.重庆:科学技术出版社重庆分社,1989.3李润方,龚剑霞.接触问题数值方法及其在机器设计中的应用.重庆:重庆大学出版社,1991.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|