Abstract:
|
Because of the nonuniform plastic deformation,residual stresses occur in spun parts. The magnitude and distribution of residual stresses have an important influence on used property of spun parts.In this paper,residual stresses of spun parts have been estimated by elasto- plastic FEM. The influence of the process parameters( reduction in thickness,feed,roller angle,blank thickness, material properties,etc.) on the residual stress distribution has been obtained.The calculated results are compared favourably with experimental results.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
1 葛文翰 .旋压筒形件的残余应力的分布研究 .锻压机械 ,1985 (3) .
2 李先禄等 .强力旋压薄壁筒形件的残余应力及其对产品性能的影响 .中国兵工学会压力加工学会第三届学术年会论文 ,1985 .
3 A E Tekkaya,JGerhardt.Residual Stress in Cold-Formed Workpieces.Annals of the CIRP,1985 ,34(1) :2 2 5~ 2 30
4 Joachim Danckert.The Residual Stress Distributionin Wall of a Deep- Drawn and Ironed Cup Determine Experi-mentally and by FEM.Annals of the CIRP,1994,43(1) :2 49~ 2 5 2
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|