Abstract:
|
This paper focuses on the optimization of the preform die shapes through controlling forging geometry by using rigid plastic finite element method,sensitivity analysis and engineering optimization algorithm When lower die velocity equals to zero, the sensitivity boundary conditions also equal to zero and preform die shape keeps constantly in optimization iteration In order to overcome the above limitation,a method dealing with sensitivity boundary conditions is put forward For the problem that the program running takes much longer time,the paper presents a method of storing sensitivity stiff matrices and reducing optimization design variables The program running time is greatly decreased using the method Finally, the reliability of the methods is demonstrated by one optimization design example
|
Funds:
|
霍英东教育基金会高等院校青年教师基金资助项目 ;;
山东省优秀中青年科学家科研奖励基金资助项目
|
AuthorIntro:
|
|
Reference:
|
1 BadrinarayananS ,ZabarasN ASensitivityAnalysisfortheOptimalDesignofMetalFormingProcesses.ComputerMethApplMechEngng,1996,129:319348
2 FourmentL ,ChenotJL OptimalDesignforNonSteadyStateMetalFormingProcessIShapeOptimizationMethod.IntJ NumMethodinEng,1996,39:3350
3 ZhaoGuoqun,WrightEdPreformDieShapeDesigninMetalForm ingUsingOptimizationMethod.IntJ ForNumMethodinEng,1997,40:12131230
4 ZhaoGQ ,HuffR SensitivityAnalysisBasedPreformDieShapeDe signUsingtheFEM .J OfMatEngAndPerf,1997,6:303310
5 赵国群,贾玉玺,王广春,赵振铎圆盘锻件纯形状锻造模具优化设计机械工程学报,1999,35(4)
6 赵国群,王广春,贾玉玺等材料塑性成形过程最优化设计-I有限元灵敏度分析方法塑性工程学报,1999,6(2):8184
7 ChungSH ,HwangSM OptimalProcessDesignInNonIsothermalNoSteadyMetalFormingbyFEM .IntJ ForNumMethInEng,1998,42:13431390
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|