|
Abstract：
|
|
Stagger spinning of tube parts is a very complicated plastic forming process. In real production, spinning defects are produced usually accompanying the production. In this paper, the reason of some typical defects of tube stagger spinning is studied by a method of three dimension elastic\|plastic finite element (FEM) simulation. This will be very helpful in directing the production of spinning parts in theory.
|
|
Funds：
|
|
中国航天技术集团总公司九五课题 (编号 18 6 0 96 0 810 0 1)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
1 陈适先,贾文铎,曹庚顺强力旋压工艺及设备,北京:国防工业出版社,1986
2 SKobayashi,EGThomsenTheoryofspinforgingAnnalsoftheCI RP1962,10(2):139～149
3 MichaGur,JehudaTiroshPlasticflowinstabilityunde rcompressiveloadingduringshearspinningprocessTransactionsoftheA SMEJofEngforInd1982,104:17～22
4 SKalpakjian,SRajagopalSpinningoftubes:AreviewsJournalofappliedmetalworking1988,2(3):211～2 23
5 TRammohan,RMishraS tudiesonpowerspinningoft ubesIntJProdRes1972,104(4):351～364
6 叶山益次郎,工藤洋明回转しごき加工の研究-Tubespinningの解析Jou rnalofJSME,1966,69(568):631～639
7 MasujiroHayama,HiroakiKudoExperimentalStu dyofTubeSpinningBulle tinoftheJSME1979,22(167):769～775
8 赵宪明筒形件强力旋压三维弹塑性有限元分析及实验研究哈尔滨工业大学博士学位论文,1995
9 李克智筒形件强力旋压三维弹塑性有限元数值模拟哈尔滨工业大学博士学位论文,1996
10 许沂筒形件强力旋压三维数值模拟及其在钛合金冷强旋中的应用哈尔滨工业大学博士学位论文,1999
11 葛文翰错距旋压时各旋轮压下量的合理分配和错距值的选择第五届全国旋压技术交流会论文汇编,1990,26-31
12 王成和,刘克璋等旋压技术,北京:机械工业出版社,1986
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved