|
Abstract：
|
|
According to the characteristic of forge part with thin\|wall and deep\|cylinder, liquid forging technology was adopted to shape a model forge part with a 40mm inside diameter and 4mm wall thick and in a height of 100mm. The alloy ZL105 was adopted to shape the model forge part in a test die. The factors affect the shaping of model forge part were discussed in this paper. And the force of core drawing\|out was test and calculated also in this paper.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
1 罗守等钢质液态模锻哈尔滨:哈尔滨工业大学出版社,1990
2 孙友松等面向新世纪的塑性加工技术锻压技术,2000,25(2):39
3 雷广孝等铸造铝合金的直接熔炼重庆有色金属研究所,2000(2):49
4 赖华清等转向螺母锻模块液态模锻工艺分析及模具设计金属成形工艺,1998,16(2):11
5 工程材料实用手册编委会工程材料实用手册(3)北京:中国标准出版社,1989:320
6 王家宣等铝合金间接液态模锻抽芯力的分析与计算,第一届半固态金属加工技术研讨会论文集,北京,2000
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved