Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Multi-station cold heading forming technology on complex vehicle sleev…   2025 ,50(1):48-58
· Forging strike energy experiment of front shaft based on 80 MN electri…   2025 ,50(1):59-65
· Conformal forming technology on special-shaped thin-walled flange   2025 ,50(1):66-73
· Simulation study on formability of TA1/2A12 composite plates   2025 ,50(1):74-82
· Forming process analysis and springback control of 6014 aluminum alloy…   2025 ,50(1):83-91
· Hot bending process and microstructure properties on low-cost titanium…   2025 ,50(1):92-101
· Numerical simulation and process optimization on longitudinal stretch…   2025 ,50(1):102-107
· Experimental research on influence of blanking section quality on oute…   2025 ,50(1):108-112
· Effect of preheating temperature on microstructure and properties for …   2025 ,50(1):113-121
· Prediction on rolling force of horizontal roller of NGO-RF hot-rolled …   2025 ,50(1):122-133
· Prediction on finish rolling temperature for hot-rolled strip based on…   2025 ,50(1):134-139
· Near net forming technology on large special-shaped ring forgings of …   2025 ,50(1):140-147
· Optimization of roll forming process for single-layer solid spherical …   2025 ,50(1):148-155
· Effects of riveting misalignment on forming quality and mechanical pro…   2025 ,50(1):156-164
· Prediction on riveting strength of relay wafer and optimization of pro…   2025 ,50(1):165-175
· Static analysis and secondary optimization on upper frame for steel wi…   2025 ,50(1):176-182
· Design on multi-axis linkage press structure and control system for co…   2025 ,50(1):183-192
· Design and application on drive control system for 1600 kN servo crank…   2025 ,50(1):193-200
· Structure design on composite die for gas stove cover   2025 ,50(1):201-205
· Life extension measures based on failure causes of hot forging die for…   2025 ,50(1):206-214
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com