Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Study on influence of 08F steel blanking clearance on the section of m… Chen Chen, Li Xiaowei 2014 ,39(6):98-104
· Study of the stamping process and the mold design for separator Hu Zhaoguo, Zhu Chao, Leng Zhenlong 2014 ,39(6):105-109
· Development and application of general mold carrier for screw press Jiao Weixiang，Liu Songwei，Ma Li，Deng Linfang， Tian Yu 2014 ,39(6):110-114
· Material flow analysis on spur gear of closed extruding fine blanking Deng Ming，Liu Luzhou，Lv Lin, Ma Yilong 2014 ,39(6):114-117
· Numerical analysis of springback for V-shaped pieces based on Dynaform Huang Wei, Li Mengqun,Yang Yawei 2014 ,39(6):118-121
· Study on flow stress and friction factor by rod-rod combined extrusion… Huang Zhichao, Chen Wei, Zhan Jinqing, Xue Shuguang 2014 ,39(6):122-124
· Effects of ECAE treatment on the microstructure and mechanical propert… Wang Xiaofei，Gao Wei 2014 ,39(6):125-127
· Numerical simulation and experimental research of drawing process of E… Chen Zhiying, Liu Zhenglei, Ren Yunlai 2014 ,39(6):128-131
· Numerical simulation and control method of wrinkling in rubber high pr… Jia Min, Bai Ying, Xu Haiyan, Chen Lei 2014 ,39(6):132-136
· Housing fillet optimization of universal section mill by BP-NSGA combi… Ma Jinhong, Chen Wei, Zhang Wenzhi, Li Juan 2014 ,39(6):137-141
· Finite element numerical simulation of finishing rolling deformation f… Ma Yanfei, Zhang Xiaoping, Li Yue, Wang Qiang 2014 ,39(6):142-146
· Analysis on roller temperature of universal mill with different rollin… Guo Xiping, Shen Shijie，Huang Lijuan，Zhou Shuang 2014 ,39(6):147-150
· Multi-objective optimization of forming process for large-scale Al all… Yuan Hongling, Wang Kesheng 2014 ,39(6):151-156
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com