·
Present condition and development of the molding tool manufacturing in…
| CHEN Zhi-ming ZHANG Hai-ou WANG Gui-lan(State Key Laboratory of Die & Mould Technology,Huazhong University of Science and Technology) |
2004
,29(5):1-4
|
·
Investigation in magnesium alloy forming technology and its applicatio…
| LIU Kui-li~1 ZHANG Zhi-min~2 YANG Bao\|fu~2(1.Zhoukou Normal University;2.Engineering Technology Research Center of Integrated Precision Forming of ShanXi Province,North China University of Science and Technology) |
2004
,29(5):5-8
|
·
Analysis and control of coarse grain formation of GH4169 alloy turbine…
| ZHOU Xiao-hu(Hongyuan Aviation Forging & Casting Industry Company) |
2004
,29(5):9-11
|
·
Evaluating model of process plan for large complicated Stampings
| ZHENG Jin-qiao WANG Yi-lin LI Zhi-gang(State Key Laboratory of Die & Mold Technology, Huazhong University of Science & Technology) |
2004
,29(5):12-16
|
·
Improvement on drawing process of shallow head
| CHEN Zhi-ying XU Shu-qin SUN Wen-jin(Taiyuan University of Technology) |
2004
,29(5):16-18
|
·
Numerical calculation and analysis on spring back of sheet metal stret…
| DU Song(School of Mechanical Engineering and Automation, Beihang University) |
2004
,29(5):19-22
|
·
Failure analysis of stamping process for car trunk lid outer panel
| WU Hua JIANG Hao-min LI Chuan-hai XIE Jian-qiang XIE Jian-ping(Shanghai Baosteel Research Institute) |
2004
,29(5):23-25
|
·
A new heuristic approach for solving the layout problem of rectangle p…
| CHEN Xue-song~(1,2) CAO Ju~2 FANG Reng-cun~2(1.Faculty of Applied Mathematics, Guangdong University of Technology;2.Mathematics Department Huazhong University of Science & Technology) |
2004
,29(5):26-28
|
·
Development of new type of wheel based on CAE and rapid prototyping te…
| GUAN Yan-jin ZHAO Guo-qun WANG Guang-chun LI Hui\|ping(Die & Mold Engineering Technology Research Center, Shandong University) |
2004
,29(5):29-31
|
·
Kinematics analysis of flexible axial feed rolling
| XU Chun-guo REN Guang-sheng MA Cui-ping LIU Gui-hua(Beijing Research Institute of Mechanical and Electrical Technology) |
2004
,29(5):32-34
|
·
Study on remeshing technique for 3D finite element in metal forming pr…
| HUANG Zhi-chao~1 BAO Zhong-xu~2 ZHOU Tian-rui~2(1.School of Mechanical & Electronic Engineering, East China Jiaotong University;2.College of Mechanical & Electronic Engineering, Nanchang University) |
2004
,29(5):35-39
|
·
Metal plastic contacting deformation,contacting strength and its metho…
| CHEN Wei~(1,2,3) LIU Gang~3 ZHOU Liu-fang~4(1.Armored force Engineering Institute;2.Jiangsu Fasten Co. Ltd; 3. Harbin Institute of Technology; 4.North Vehicle Co. Ltd) |
2004
,29(5):40-45
|
·
Research on the relation between bulging and friction in cylinder upse…
| XU Shu-qin CHEN Zhi-ying ZHANG Shan-yuan(College of Material Science and Engineering, Taiyuan University of Technology) |
2004
,29(5):46-48
|
·
Non-interferent design and research on multi-stage automated feeder sy…
| LUO Yun-hua ZHANG Xiang-lin ZHANG Ying HUANG Zao-wen(State Key Laboratory of Die & Mould Technology,Huazhong University of Science and Technology) |
2004
,29(5):49-52
|
·
Research on PMAC-based control system of rapid prototyping & manufact…
| LI Jun-chao YE Chun-sheng MO Jian-hua(State Key Laboratory of Die & Mould Technology, Huazhong University of Science and Technology) |
2004
,29(5):53-55
|
·
Development of 3D standard-part library of stamping die CAD in I-DEAS
| HUANG Jing ZhAO Zhen CHEN Jun(Dept. of Plasticity Technology, Shanghai Jiaotong University) |
2004
,29(5):56-59
|
·
Study on functional-oriented CAD of panel trimming and punching die de…
| YU Xue-wen WANG Hua-chang WANG Geng-yun LI Zhi-gang(State Key Laboratory of Die & Mould Technology,Huazhong University of Science and Technology) |
2004
,29(5):60-62
|
·
Design and analysis sofeware system of the aluminum profile extrusion …
| YAN Huan-ying YU Hu-ping(Shanghai Jiaotong University) |
2004
,29(5):63-65
|
·
Design of forging die group
| ZHAO Ji-cai(Sanjiang Machinery Works , AVICⅡ) |
2004
,29(5):66-67
|
·
Solution of the stamping die pressure center by using SolidWorks 2001
| GUO Jun-qing CHEN Fu-xiao FU Xin(School of Material Science & Engineering Henan University of Science and Technology) |
2004
,29(5):68-69
|