锻压技术

挤压道次对等通道转角挤压高纯铝微观组织的影响

英文标题：Influence of extrusion pass on microstructure for ECAP high purity aluminum

作者：孙杰英

分类号：TG146.2

出版年,卷(期):页码：2023,48(3):163-169

摘要：

采用等通道转角挤压工艺，在常温下对高纯铝进行5道次挤压变形。利用透射电子显微镜和电子背散射衍射技术，对等通道转角挤压后高纯铝的组织结构、微观织构和晶界特征进行表征，研究挤压道次对等通道转角挤压高纯铝微观组织的影响以及挤压后材料组织的演化机制。结果表明：随着挤压道次的增加，材料剪切变形抗力不断增加；5 道次变形后，材料晶粒得到显著细化，形成多边界平直、低位错密度的等轴状晶粒，晶粒尺寸约为0.9 μm。同时，挤压5 道次后材料的晶粒取向逐渐变得随机，微观织构在(80°, 35°, 0°)、 (40°, 75°, 45°)和 (0°, 85°, 45°)达到峰值；超细晶高纯铝晶界是几何必须晶界，挤压后超细晶的形成是连续动态再结晶的结果。

The equal channel angular pressing ( ECAP) process was used，and the five-pass extrusion deformation of high purity aluminum was conducted at room temperature. Then, the microstructure, microtexture and grain boundary characteristics of the high purity aluminum processed by ECAP were investigated by means of TEM and EBSD, and the influences of extrusion pass on the microstructure of high purity aluminum after ECAP processing and the evolution mechanism of material structure after estrusion were studied. The results indicate that the shear deformation resistance of the material continuously increases with the increasing of extrusion passes. After five passes of deformation, the grains of the material are significantly refined, forming equiaxed grains with mulit-boundary straight and low dislocation density, and the grain size is about 0.9 μm. At the same time, after five passes of extrusion, the grain orientation of material gradually becomes random, and the microtextures at (80°, 35°, 0°), (40°, 75°, 45°) and (0°, 85°, 45°) reaches the peak value. The grain boundary of ultra-fine-grained high-purity aluminum is a geometrically necessary grain boundary, and the formation of ultra-fine grains after extrusion is the result of continuous dynamic recrystallization.

基金项目：

作者简介：孙杰英（1988-），男，硕士，工程师 E-mail：sunjieying01@126.com

参考文献：

[1]余富忠, 赵强李. 多向锻造对汽车用AZ80 镁合金组织及性能的影响[J]. 锻压技术, 2021， 46(3): 32-36.

Yu F Z, Zhao Q L. Influence of multi-directional forging on microstructure and properties for AZ80 magnesium alloy used for automobile [J]. Forging & Stamping Technology，2021，46(3)：32-36.

[2]Hyogeon K, Hyesu H, Jungsub L, et al. Outstanding mechanical properties of ultrafine-grained Al7075 alloys by high-pressure torsion [J]. Materials Science and Engineering： A,2021，810: 20-24.

[3]薛克敏, 王喆, 刘梅, 等. 纯钼高压扭转过程中微纳尺度的力学性能[J]. 稀有金属材料与工程, 2019, 48(6):2033-2037.

Xue K M, Wang Z, Liu M, et al. The nan-scale mechanical properties of the high purity molybdenum in high-pressure torsion process [J]. Rare Metal Materials and Engineering, 2019, 48 (6): 2033-2037.

[4]王琳, 谢志宝. 累积叠轧制备的 Cu/Al/Cu 复合板材金属间化合物层演变及其对力学性能影响研究[J]. 精密成形工程, 2021, 13(6): 70-76.

Wang L, Xie Z B. Evolution of intermetallic layer of Cu/Al/Cu laminated composites and its effect on mechanical properties [J]. Journal of Netshape Forming Engineering, 2021, 13(6): 70-76.

[5]王军亮，尹登峰，王华，等. Al-Sc-Zr-Er-Ti 铝合金累积叠轧组织性能及织构研究[J]. 矿冶工程, 2022, 42(1):126-130.

Wang J L, Yin D F, Wang H, et al. Microstructure，properties and texture of Al-Sc-Zr-Er-Ti aluminum alloy by accumulative roll bonding[J]. Mining and Metallurgical Engineering, 2022, 42(1): 126-130.

[6]井菲菲，杨西荣，刘晓燕，等.工业纯锆ECAP单道次变形组织与性能研究[J].稀有金属材料与工程，2018，47(4): 1124-1129.

Jing F F, Yang X R, Liu X Y, et al. Effect of one pass ECAP on microstructure and properties of commercial purity zirconium [J]. Rare Metal Materials and Engineering, 2018，47(4):1124-1129.

[7]Rominyi A L, Oluwasegun K M, Olawale J O, et al. Effect of post ECAP aging on the microstructure, hardness and impact behavior of 6061 Al alloy[J]. Materials Today: Proceedings, 2020, 38(2): 1031-1034.

[8]葛佳琪，杨文朋，王诗蒙，等. 纯镁在ECAP中组织演变及温度对变形组织的影响 [J]. 有色金属工程, 2019, 9(9): 99-106.

Ge J Q, Yang W P, Wang S M, et al. Microstructure evolution of pure magnesium in ECAP and effect of temperature on deformed microstructure[J]. Nonferrous Metals Engineering, 2019, 9(9): 99-106.

[9]Salem A A, Langdon T G, Mcnelley T R, et al. Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum [J]. Metallurgical and Materials Transaction A, 2006, 37(9): 2879-2891.

[10]邵琦，吴晓玉，张玲，等. 连续等通道转角挤压对Al-Ti-C合金组织与性能的影响[J]. 材料工程, 2022, 50(3): 115-121.

Shao Q, Wu X Y, Zhang L, et al. Effect of continuous equal channel angular pressing on microstructure and properties of Al-Ti-C alloy[J].Journal of Materials Engineering, 2022, 50(3): 115-121.

[11]Iwahashi Y, Wang J T, Horota Z J, et al. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials [J]. Scripta Materialia, 1996, 35(2): 143-146.

[12]Liu Q, Hansen N. Geometrically necessary boundaries and incidental dislocation boundaries formed during cold deformation [J]. Scripta Metallurgica et Materialia, 1995, 32(8): 1289-1295.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】