锻压技术

步进电机外壳零件多工位级进模设计

英文标题：Design on multi-station progressive die for stepper motor shell parts

作者：王天宝1 袁博2 刘立明3

单位：1. 内蒙古交通职业技术学院管理工程系 2.武汉城市职业学院机电工程学院 3.山西兴县华润联盛车家庄煤业有限公司

分类号：

出版年,卷(期):页码：2022,47(3):174-177

摘要：

根据步进电机外壳零件的特点及生产的技术要求，进行多工位级进模设计。首先，步进电机外壳零件的排样方式采用单排直排排样，送料定距采用侧刃粗定位、导正销精定位，送料步距为57.35 mm，使得板料在每次弹起并移动到下一步工位的过程变得更加精准；其次，步进电机外壳零件多工位级进模采用顺装结构，使得工件与废料自然分离，有利于减少人工成本；最后，步进电机外壳零件未进行空工位设计，整体上减少了模具的体积，降低了模具生产制造的成本。生产结果表明：步进电机外壳多工位级进模的结构设计合理，对指导工程实际生产具有重要的参考意义。此外，该模具的材料利用率高达85%，节省了材料。

Based on the characteristics of stepper motor shell parts and the technical requirements of production, the multi-station progressive die was designed. First of all, the stepper motor shell parts were arranged in a single straight row, and the feeding distance adoptted coarse positioning of side edge and fine positioning of guide pin, with a feeding step of 57.35 mm, which made the process of popping up and moving to the next station for sheet more accurate. Secondly, the multi-station progressive die of stepper motor shell parts adopted a smooth discharge structure, which made the workpiece and scrap separate naturally and reduced labor costs. Finally, the multi-station progressive die of stepper motor shell parts was designed without empty stations,

which reduced the overall volume of die and the cost of die manufacturing. The production results show that the structure design of multi-station progressive die for stepper motor shell parts is reasonable, which has important reference significance for guiding the actual production of engineering. In addition, the material utilization ratio of die is as high as 85%, which saves material.

基金项目：

武汉黄鹤英才（优秀青年人才）资助项目；武汉市市属高校产学研研究项目 (CXY202020)；2020年度武汉市前资助科技计划项目(2020010601012292)；湖北省教育厅科研计划项目(B2021529,B2020427,B2019433)；武汉城市职业学院科研创新团队建设计划资助项目（2020whcvcTD02）；武汉城市职业学院校级硕博士专项（2021whcvcB02,2020whcvcB02）；湖北省高价值知识产权培育工程（专利类）项目（2020-0713）

王天宝（1981-），男，硕士，副教授 E-mail：3012191@qq.com 通信作者：袁博（1986-），男，硕士，讲师 E-mail：yuanbohg@126.com

参考文献：

[1]邓明，温彤.冲压工艺及模具设计[M].北京: 化学工业出版社，2009.

Deng M, Wen T. Stamping Process and Mold Design[M].Beijing: Chemical Industry Press，2009.

[2]袁博, 张贝,唐鑫.卡头零件多工位级进模设计[J].锻压技术,2020,45(3):137-140.

Yuan B, Zhang B, Tang X. Multi-position progressive die design for chuck parts[J].Forging ＆ Stamping Technology，2020,45(3):137-140.

[3]袁博，张耀，陈淑花.耳环安装零件多工位级进模设计[J].锻压技术,2020,45(8):175-178.

Yuan B,Zhang Y,Chen S H. Multi-station progressive die design for earring installation parts[J].Forging ＆ Stamping Technology,2020,45(8):175-178.

[4]王雪, 张景峰,李冰,等.不同球心距对连续挤压异型材成形流动特征的影响[J].塑性工程学报,2019,26(5):23-30.

Wang X，Zhang J F，Li B, et al. Effect of different spherical center distances on forming flow characteristics of continuous extrusion special-shaped profile[J].Journal of Plasticity Engineering，2019,26(5),23-30.

[5]邵振江，胡鹏飞，周峰，等. 汽车用固定架级进模冲压工艺研究[J]. 机械设计, 2018, 35(S1): 318-319.

Shao Z J, Hu P F, Zhou F, et al. Study on stamping technology of fixed-stage progressive die for automobile[J].Journal of Machine Design,2018,35(S1):318-319.

[6]邵慧敏. 适用于链板级进模制造的国产冷冲压模具材料[J].机械传动,2016,40(11):75-79.

Shao H M. Domestic cold stamping die material suitable for chain plate progressive die manufacturing[J].Journal of Mechanical Transmission,2016,40(11):75-79.

[7]王猛，运新兵，裴久杨，等.压实轮压下量对铜棒材连续挤压轮槽区组织的影响[J].塑性工程学报，2018,25(2):91-98.

Wang M, Yun X B, Pei J Y, et al. Effect of coining roll reduction on microstructure in wheel groove during continuous extrusion of copper bar[J]. Journal of Plasticity Engineering,2018,25(2):91-98.

[8]谢晖, 黄康, 陈建新, 等.双层不锈钢消声器壳体冲压工艺CAE分析与优化[J].塑性工程学报, 2018, 25 (2):1-8.

Xie H, Huang K, Chen J X, et al. CAE simulation and optimization of double-layer stainless steel muffler shell stamping process[J].Journal of Plasticity Engineering, 2018, 25 (2):1-8.

[9]任成艳，张如华，徐仁辉, 等.一种散热器上托底板成形工艺改进研究[J].塑性工程学报, 2019,26(3),83-88.

Ren C Y, Zhang R H, Xu R H, et al. Research on improvement of forming process for a radiator uplifted bottom plate[J].Journal of Plasticity Engineering, 2019,26(3),83-88.

[10]陈炜, 杨伟龙, 舒泽泉, 等.热冲压淬火关键工艺参数实验研究[J].塑性工程学报, 2018, 25 (1):264-268.

Chen W, Yang W L, Shu Z Q, et al. Experimental research on key parameters of quenching process during hot stamping [J]. Journal of Plasticity Engineering, 2018, 25 (1):264-268.

[11]陈泽中，李响，刘欢, 等.基于Dynaform的SUV汽车B柱热冲压成形仿真分析与工艺研究[J].塑性工程学报, 2019,26(4),113-119.

Chen Z Z, Li X, Liu H, et al. Simulation analysis and process research of hot-stamped SUV B-pillar based on Dynaform [J]. Journal of Plasticity Engineering, 2019,26(4),113-119.

[12]袁博, 陈淑花,张耀,等. 压簧折弯多工位级进模具设计[J]. 锻压技术,2021,46(5):190-193.

Yuan B，Chen S H，Zhang Y，et al. Design on multi-station progressive die for pressure spring bending[J]. Forging & Stamping Technology，2021,46(5):190-193.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】