|
摘要：
|
|
为了改善温锻压力机肘杆机构的下压性能、提高产品质量，提出了肘杆机构的自适应粒子群算法优化方法。使用封闭矢量法建立了传动机构的运动学模型。以6连杆尺寸为优化参数，以滑块最大运动速度、最大加速度和曲柄最大输出扭矩为优化目标，建立了优化模型，根据曲柄存在条件、上连杆摆角约束、滑块行程约束等设置了约束条件。在粒子群算法的基础上，提出了算法参数随粒子适应度和算法迭代次数的自适应变化律，给出了基于自适应粒子群算法的优化模型求解方法。经过优化，在公称压力行程范围内，滑块的最大运动速度降低了1.87%，最大加速度降低了3.13%，曲柄最大输出扭矩降低了1.10%，改善了肘杆机构的下压性能，同时证明了自适应粒子群算法在传动机构参数优化中的有效性。
|
|
In order to improve the pressure performance of elbow-bar mechanism in warm forging press and the quality of products, the optimization method of elbow-bar mechanism was proposed based on adaptive particle swarm algorithm, and the kinematics model of transmission mechanism was established by closed vector method. Then, taking the sizes of six links as the optimizing parameters and taking the maximum movement speed and the maximum accelerate of slider, as well as the maximum output torque of crank as the optimization goals, the optimization model was built, and the constraint conditions were set based on crank existing condition, upper link swing angle constraint and slider stroke constraint. On the basis of particle swarm algorithm, the adaptive change law of algorithm parameters with particle fitness and iteration number of algorithm was proposed, and the optimization model solution method was provided by adaptive particle swarm algorithm. The optimization results show that within the range of nominal pressure stroke, the maximum movement speed and the maximum accelerate of slider as well as the maximum output torque of crank decrease by 1.87%, 3.13% and 1.10% respectively to improve the pressure performance of elbow-bar mechanism, and the effectiveness of adaptive particle swarm algorithm in the parameter optimization of transmission mechanism is also proved.
|
|
基金项目：
|
|
国家自然科学基金青年基金项目（78865567）
|
|
作者简介：
|
|
孙建香（1971-），女，硕士，副教授，E-mail：jianxiangsunyt@126.com
|
|
参考文献：
|
[1]王利卿，张国辉. 机械压力机肘杆结构的高效成长郊狼算法优化 [J]. 锻压技术，2020,45(11):156-161.
Wang L Q，Zhang G H. Optimization on elbow-bar structure of mechanical press based on efficient growth coyote algorithm [J]. Forging & Stamping Technology，2020,45(11):156-161.
[2]贾大明，王俊卿，刘志刚. 三种对称多连杆式冲压机构传动特性对比分析 [J]. 锻压技术, 2019, 44(6):110-114.
Jia D M, Wang J Q, Liu Z G. Comparative analysis on transmission characteristics for three stamping mechanisms of symmetrical multi-link type [J]. Forging & Stamping Technology, 2019, 44(6):110-114.
[3]田旭. 偏置六杆机构拉深成形压力机杆系优化及虚拟样机设计[D]. 秦皇岛：燕山大学，2017.
Tian X. Dimensional Optimization of Offset Six Bar Mechanism of Mechanical Press Used in Deep Drawing Process and Virtual Prototype Design [D]. Qinhuangdao: Yanshan University, 2017.
[4]陈新德. ZL50型装载机反转六杆机构的优化设计[J]. 机械传动, 2018, 42(10):107-111.
Chen X D. Optimal design of reverse-six-link mechanism of type ZL50 loader [J]. Journal of Mechanical Transmission, 2018, 42(10):107-111.
[5]胡建国, 孙友松, 章争荣, 等. 基于ADAMS的伺服压力机三角肘杆式工作机构优化设计[J]. 锻压技术, 2019, 44(2): 131-136.
Hu J G, Sun Y S, Zhang Z R, et al. Optimized design of triangle toggle working mechanism for servo press based on ADAMS [J]. Forging & Stamping Technology, 2019, 44(2):131-136.
[6]王亚茹, 李静. 采用混合粒子群算法的四杆机构参数优化与轨迹误差研究[J]. 组合机床与自动化加工技术, 2018,（9）：88-91.
Wang Y R, Li J. Study on parameter optimization and trajectory error of four-bar mechanism by hybrid particle swarm optimization algorithm [J]. Modular Machine Tool & Automatic Manufacturing Technique, 2018，（9）：88-91.
[7]沈明秀, 王荔芳. 基于粒子群算法的平面四杆机构优化与动力学仿真[J]. 中国工程机械学报, 2017，15(1)：15-20.
Shen M X, Wang L F. Optimization and dynamical simulation on planar four-bar mechanism based on particle swarm optimization algorithm [J]. Chinese Journal of Construction Machinery, 2017，15(1)：15-20.
[8]李鹏飞，伞红军，陈久朋，等. 基于封闭矢量法和D-H法的四足机器人逆运动学分析[J].科学技术与工程，2019,19 (4):161-165.
Li P F, San H J, Chen J P, et al. Analysis of inverse kinematics of quadruped robot based on closed vector method and D-H method [J]. Science Technology and Engineering, 2019,19 (4):161-165.
[9]胡建国，孙友松，章争荣，等. 基于ADAMS的伺服压力机三角肘杆式工作机构优化设计 [J].锻压技术，2019,44(2):126-131.
Hu J G，Sun Y S，Zhang Z R，et al. Optimized design of triangle toggle working mechanism for servo press based on ADAMS [J].Forging & Stamping Technology，2019, 44(2): 126-131.
[10]刘善民, 吴子岳, 刘善增. 六连杆双曲柄滑块机构冲压机床的结构参数分析与优化[J]. 机械传动, 2018, 42(8): 127-130.
Liu S M, Wu Z Y, Liu S Z. Structural parameter analysis and optimization of six-link double-crank slider mechanism of stamping machine [J]. Journal of Mechanical Transmission, 2018, 42(8):127-130.
[11]赵亚亚，黄校茹，钱富才，等. 基于粒子群优化算法的分数阶系统二次型最优控制算法[J] .科学技术与工程，2019, 19(36)：212-216.
Zhao Y Y, Huang X R, Qian F C, et al. Quadratic optimal control algorithm for fractional order systems based on particle swarm optimization [J]. Science Technology and Engineering, 2019, 19(36)：212-216.
[12]Tang Y, Guan X. Parameter estimation for time-delay chaotic system by particle swarm optimization[J]. Chaos Solitons & Fractals, 2017, 40(3):1391-1398.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
