锻压技术

挤压机框架结构的三维参数化设计

英文标题：Threedimensional parametric design on extruder frame structure

作者：张江伟王博杜祎君

分类号：TH122

出版年,卷(期):页码：2021,46(1):131-135

摘要：

介绍了SolidWorks二次开发的技术原理与关键技术、挤压机框架预紧受力原理及计算过程。参数化设计过程分为技术路线的确定、参数化模型的确定、参数的确定、人机界面的确定，最后，编制程序实现参数化设计功能。参数的确定是设计过程中的核心，决定了模型建立的内在逻辑以及最终人机界面的友好程度。采用主程序、附属程序以及手动修改相结合的方法，利用VB编程，将产品内部参数间的关联性融入二次开发的程序中，通过SolidWorks API驱动SolidWorks软件，实现了挤压机框架的三维参数化设计，并增加了一些人性化和实用性的功能，以方便设计人员的使用。在保证设计准确率的前提下，使设计效率提高了50%以上。

The technical principle and key technology of SolidWorks secondary development as well as the principle and calculation process of pre-tightening force for extruder frame were introduced. Then, the parametric design process was divided into the determination of technical route, the determination of parametric model, the determination of parameters and the determination of man-machine interface, and the parametric design function was finally realized by compiling program. Above all, the determination of parameters was the core of design process and determined the internal logic of the model establishment and the friendliness for the final man-machine interface. Furthermore, combined the main program, auxiliary program and manual modification and used VB programming, the correlation between the internal parameters of product was integrated into the secondary development program, and three-dimensional parametric design of extruder frame was realized by SolidWorks API driving the SolidWorks software. In addition, some humanized and practical functions were added to facilitate the use of designers. Thus, under the premise of ensuring design accuracy, the design efficiency was increased by more than 50%.

基金项目：

作者简介：张江伟（1986-），男，工学硕士，高级工程师 E-mail：zhangjiangwei110@163.com

参考文献：

[1]徐国权，黄志超.基于SolidWorks的参数化设计二次开发研究[J].机械设计与研究，2007，23(1)：68-70.

Xu G Q, Huang Z C. Research on secondary development of parametric design based on SolidWorks [J]. Mechanical Design and Research, 2007,23(1):68-70.

[2]张建德，邵定红，陆金桂，等.基于SolidWorks的齿轮参数化设计及实现[J].微计算机信息，2007，23(5)：250-254.

Zhang J D, Shao D H, Lu J G, et al. Gear parametric design and realization based on SolidWorks[J]. Microcomputer Information, 2007,23(5):250-254.

[3]陈毅. 基于SolidWorks二次开发的齿轮参数化系统设计[J].机械制造与研究，2009，38(1)：26-28.

Chen Y. Gear parametric system design based on the secondary development of SolidWorks [J]. Machinery Manufacturing and Research, 2009,38(1):26-28.

[4]何宁，白海清.基于VB开发SolidWorks标准件库[J].机械与电子，2004，(6):18-19.

He N, Bai H Q. Develop SolidWorks standard parts library based on VB [J]. Machinery and Electronics, 2004,(6):18-19.

[5]朱朝宽. 利用VB开发SolidWorks标准件实体库[J].计算机应用，2002，31(3);59-60.

Zhu C K. Use VB to develop SolidWorks standard parts entity library [J]. Computer Application, 2002,31(3):59-60.

[6]孙建军，黎旭，唐慧海，等.基于SolidWorks二次开发的非标准件参数化设计[J].现代制造工程，2003，(6):30-32.

Sun J J, Li X, Tang H H, et al. Parametric design of nonstandard parts based on the secondary development of SolidWorks [J]. Modern Manufacturing Engineering, 2003,(6):30-32.

[7]蒋南希. 浅议汽车底盘的参数化设计[J].现代工业与信息化，2015，(1):42-43.

Jiang N X. On the parametric design of automobile chassis [J]. Modern Industry and Information, 2015,(1):42-43.

[8]吕晓燕，贾海英，张晓钟.基于VB对SolidWorks二次开发方法的研究[J].机械设计与制造，2005，(3):114-116.

Lyu X Y, Jia H Y, Zhang X Z. Research on the secondary development method of SolidWorks based on VB[J].Machinery Design & Manufacture, 2005,(3):114-116.

[9]马咏梅，丁行武，李鑫.SolidWorks二次开发在机械零件设计中的应用与研究[J].机械传动，2010，(1):72-74,81.

Ma Y M, Ding H W, Li X. The Research and application of further development of SolidWorks in design of machine parts[J].Journal of Mechanical Transmission,2010,(1):72-74,81.

[10]索超，李玉翔，林树忠.基于VB语言对SolidWorks参数化设计的二次开发[J].制造业自动化，2013，(15):137-140.

Suo C, Li Y X, Lin S Z. The secondary development of SolidWorks parametric design based on VB language[J].Manufacturing Automation,2013,(15):137-140.

[11]江洪. SolidWorks二次开发实例解析[M]. 北京：机械工业出版社，2004

Jiang H. The Case Analysis of SolidWorks Secondary Development[M]. Beijing: China Machine Press,2004.

[12]张军伟，王士军，郑晓龙.基于SolidWorks尺寸驱动法二次开发的滚珠丝杠三维建模[J].组合机床与自动化加工技术， 2015，(11):22-24.

Zhang J W, Wang S J, Zheng X L. The 3D modeling of ball screw on secondary development of SolidWorks dimension driven [J].Modular Machine Tool & Automatic Manufacturing Technique, 2015,(11):22-24.

[13]殷国富. SOLIDWORKS二次开发实例精解[M]. 北京：机械工业出版社，2006.

Yin G F. Refined Solution of SOLIDWORKS Secondary Development Example[M].Beijing: China Machine Press,2006.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】