锻压技术

中厚板多辊矫直机结构力学理论分析

英文标题：Theoretical analysis on structural mechanics for multi-roll straightener of plate

作者：李昕涛

分类号：TG305

出版年,卷(期):页码：2020,45(11):134-142

摘要：

针对实际矫直后的矫直板存在残余应力的工程问题，通过空间描述法的世界线法，结合现代几何学对现有矫直机的工作辊系进行了几何构造分析，得出：矫直机的工作辊系形成了特有的结构力学连拱结构。依据结构力学中等拱高的连拱结构中奇数拱为几何不变体系、偶数拱为几何可变体系的理论，分析得出：工作辊系整体布置应符合奇数辊几何不变体系，偶数辊采用预应力法实现几何不变体系。对矫直金属板进行结构力学分析得出：入口侧辊系主要提供矫直压力，出口侧辊系主要提供金属板水平推力。工程实测的试验结果补充并完善了矫直机出口侧矫直辊系受力出现峰值的理论依据。

For the engineering problem of residual stress existing in the actual straightened plate, the work roll system of existing straightener was geometrically analyzed by world line method of spatial description method and modern geometry, and it was concluded that the work roll system of straightener formed a unique structural mechanical multi-arch structure. Then, according to the theory of structural mechanics that the odd-numbered arch is a geometrically invariant system and the even-numbered arch is a geometrically variable system in multi-arch structure with equal arch height. The results show that the overall arrangement of work roll system should conform to the geometric invariant system of odd-numbered rolls, and the geometric invariant system of even-numbered rolls can be realized by the pre-stressed method. Furthermore, the straightening metal plate was analyzed by structural mechanics, and it is concluded that the roll system of inlet side mainly provides the straightening pressure, and the roll system of outlet side mainly provides the horizontal thrust of metal plate. According to the actual test results, the theoretical basis for the peak force of straightening roll system on the outlet side of straightener was supplemented and perfected.

基金项目：

山西省重点研发项目（201803D121123）；重型机械装备省部共建协同创新中心专项资助（2020-3-11-17）

李昕涛（1973-），男，硕士，副教授 E-mail：15003519081@163.com

参考文献：

[1]孙登月,侯海涛,汝文弟,等.宽厚板多点柔性压力矫直装置设计与反弯量计算[J].钢铁,2020,55(6):113-117.

Sun D Y, Hou H T, Ru W D, et al. Design and bending calculation of multi-point flexible pressure straightening device for wide and heavy plate [J]. Iron and Steel, 2020, 55 (6): 113-117.

[2]母萑萑.新型厚板矫直机技术[J].一重技术, 2018,(4):23-26.

Mu H H. A new-generation thick-plate straightener[J]. CFHI Technology, 2018,(4):23-26.

[3]王艳,赵连磊,崔西民, 等.九辊矫直机矫直过程仿真分析及压下规程参数设计[J].塑性工程学报,2019,26(1):293-300.

Wang Y, Zhao L L, Cui X M, et al. Simulation analysis of straightening process and design of reduction schedule parameters for nine-roller straightener[J]. Journal of Plasticity Engineering,2019,26(1): 293-300.

[4]崔甫.矫直原理与矫直机械[M].北京: 冶金工业出版社,2002.

Cui F. Straightening Principle and Straightening Machine [M]. Beijing: Metallurgical Industry Press,2002.

[5]蔡明伟，岳永哲. 基于磁致伸缩传感器的辊压机压下位移监测及误差补偿 [J].锻压技术，2019,44(4):106-112.

Cai M W，Yue Y Z. Pressing displacement monitoring and error compensation for roller press [J]. Forging & Stamping Technology，2019, 44(4): 106-112.

[6]Dubrovin B A, Fomenko A T, Novikov S P.现代几何学-方法与应用：第1卷曲面几何、变换群与场[M].第5版. 许明,译.北京:高等教育出版社,2017.

Dubrowen B A, Fuminko A T，Novikov S P. Methods and Applications of Modern Geometry: Surface Geometric, Transformation Groups and Fields(Volume I)[M]. The fifth Edition. Xu M Translated. Beijing: Higher Education Press,2017.

[7]Hiroyuki Uematsu, Keizo Abe. Overview of heat treat leveler for arcelor mittal burns harbor[A]. AISTech 2014 Proceeding.Proceedings of the Iron and Steel Technology Conference[C]. USA, 2014.

[8]单建.趣味结构力学[M].北京:高等教育出版社,2014.

Shan J. Interesting Structural Mechanics[M]. Beijing: Higher Education Press, 2014.

[9]彭培火.关于n跨连拱体系的几何构造分析[J].力学与实践,2013,35(4):68-70.

Peng P H. Geometric structure analysis of n-span multi arch system[J]. Mechanics in Engineering, 2013,35(4): 68-70.

[10]袁全,袁驷,李易,等.几何可变体系大变形机构模态的二元体构建法[J].力学与实践,2018,40(5):510-513，519.

Yuan Q, Yuan S, Li Y, et al. Construction of mechanism modes of geometrically unstable systems in large deformation [J]. Mechanics in Engineering, 2018,40(5): 510-513,519.

[11]刘鸿文.材料力学Ⅱ[M] .北京:高等教育出版社,2011.

Liu H W. Mechanics of Materials II [M]. Beijing: Higher Education Press, 2011.

[12]李艳威.辊式矫直过程残余应力测试与分析[D].太原：太原科技大学,2015.

Li Y W. Measurement and Analysis of Residual Stress in Roller Straightening Process[D]. Taiyuan: Taiyuan University of Science and Technology, 2015.

[13]龙驭球,包世华.结构力学[M] .北京:高等教育出版社,2012.

Long Y Q, Bao S H. Structural Mechanics [M]. Beijing: Higher Education Press, 2012.

[14]李相楠. 板材辊式矫直机驱动扭矩数学模型及实验研究[D].太原：太原科技大学,2012.

Li X N. Mathematical Model and Experimental Research on Driving Torque of Plate Roller Leveler [D]. Taiyuan:Taiyuan University of Science and Technology, 2012.

服务与反馈：

【文章下载】【加入收藏】