网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
空心管锻件精密辊锻成形工艺数值模拟
英文标题:Numerical simulation of precision roll forging process for hollow tube forgings
作者:杨勇 徐超 曹乃强 孙国强 侯惠敏 任伟伟 陈祥龙 
单位:北京机电研究所有限公司 内蒙古一机集团富成锻造有限责任公司 
关键词:空心管锻件 精密辊锻 延伸系数 孔型 流线分布 
分类号:TG335.7
出版年,卷(期):页码:2020,45(8):88-93
摘要:
通过对空心管锻件的工艺分析,基于数值模拟技术,对空心管锻件精密辊锻成形工艺进行了研究。在研究中发现,按照现有辊锻理论设计工艺模具时,空心管锻件在第1道辊锻时椭圆截面靠近辊缝处的内表面有应力集中和折叠现象产生,这与现有辊锻理论存在一定的偏差,要严格控制各道次辊锻延伸系数。为此,对工艺进行了优化设计,采用4道次辊锻成形。最终模拟结果显示,空心管锻件沿轴线方向上壁厚尺寸有一定的波动,局部壁厚有增厚现象,但最终辊锻成形后外形规则、无飞边、内部光滑无缺陷、工件流线分布合理,获得了较为理想的效果。
Based on the numerical simulation technology, the precision roll forging process of hollow tube forgings was studied by analyzing the process of hollow tube forgings. In the study, it was found that when the process mold was designed according to the current roll forging theory, the stress concentration and folding occurred on the inner surface of the elliptical cross-section near the roll gap during the first roll forging of hollow tube forgings, and it had a certain deviation from the current roll forging theory. Therefore, it was necessary to strictly control the extension coefficient of each pass in the roll forging, and the process was optimized by four-pass roll forging. The final simulation results show that the wall thickness dimensions of hollow tube forgings have a certain fluctuation along the axis direction, and the local wall thickness is thickened. However, after the final roll forging, the good effects of regular shape, no flash, internal smooth without defects and reasonable streamline distribution are obtained.
基金项目:
国家科技重大专项(2019ZX04022001)
作者简介:
杨勇(1982-),男,博士,高级工程师,E-mail:yy19821110@163.com
参考文献:
[1]王瑞麒, 李永堂, 贾璐, 等. P91厚壁管热挤压模具参数优化设计[J]. 塑性工程学报, 2019, 26(1):64-71.
Wang R Q,Li Y T,Jia L, et al. Optimal parameters design of hot extrusion die for P91 thick-walled pipe[J]. Journal of Plasticity Engineering, 2019, 26(1):64-71.
[2]秦敏, 李继光, 房娃, 等. 空心车轴径向锻造工艺的模拟研究[J]. 太原科技大学学报, 2008, 29(5):42-45.
Qin M, Li X G, Fang W, et al. Simulation and research of hollow-axle during the precise forging[J]. Journal of Taiyuan University of Science and Technology, 2008, 29 (5):42-45.
[3]韦韡, 蒋鹏, 曹飞, 等. 自动辊锻过程中坯料运动与机械手同步性[J]. 塑性工程学报,2012,19 (1):11-15.
Wei W, Jiang P, Cao F, et al. Synchronization of the movement between blank and manipulator in automatic roll forging[J]. Journal of Plasticity Engineering,2012,19 (1):11-15.
[4]韦韡, 蒋鹏, 曹飞. 铝合金三角臂制坯辊锻工艺与模具设计[J].模具工艺,2012,38 (5):61-65.
Wei W, Jiang P, Cao F. Blank-making and roll forging process and design of die for aluminum controlling arm[J]. Die & Mould Industry,2012,38 (5):61-65.
[5]杨光, 蒋鹏, 杨勇, 等. 防失稳槽结构在长弧线辊锻模结构中的应用及效果[J]. 锻压技术,2015,40(6):1-5.
Yang G, Jiang P, Yang Y, et al. Application and effect of anti-destabilization groove in the long arc roll forging dies[J]. Forging & Stamping Technology, 2015,40(6):1-5.
[6]杨勇, 蒋鹏, 汪非, 等. 126型销轨辊锻-整体模锻工艺研究[J]. 锻造与冲压,2013, (21):22-26.
Yang Y, Jiang P, Wang F, et al. Roller and die forging process research of 126-type pin rail[J]. Forging & Metalforming, 2013, (21): 22-26.
[7]胡金, 温彤, 张梦,等. 基于响应面法的筋肋板辊轧成形工艺参数优化[J]. 锻压技术, 2019,44(8):35-40.
Hu J, Wen T, Zhang M, et al. Optimization on rolling process parameters for rib stiffened plates based on respond surface method[J]. Forging & Stamping Technology, 2019,44(8):35-40.
[8]吴胜超, 刘华, 刘百宣,等. 旋耕刀辊锻成形工艺的数值模拟与试验验证[J]. 锻压技术, 2018, 43(1): 9-13.
Wu S C, Liu H, Liu B X, et al. Numerical simulation and test verification on roll forging technology for rotary blade[J]. Forging & Stamping Technology, 2018, 43(1): 9-13.
[9]郎利辉, 苑世剑, 王仲仁, 等. 管件内高压成形及其在汽车工业中的应用现状[J]. 中国机械工程, 2004,(3):268-272.
Lang L H, Yuan S J, Wang Z R, et al. Present situation of tube hydroforming and its applications in the automobile industry[J]. China Mechanical Engineering, 2004,(3):268-272.
[10]周杰, 夏玉峰, 江水平, 等. 套管叉热挤压成形凸模结构对锻件终成形的影响研究[J]. 锻压装备与制造技术, 2003, 38(4): 655-657.
Zhou J, Xia Y F, Jiang S P, et al. Study on influence of structure of punch of hot extrusion of transmission shaft forgings on finishing forming[J]. China Metalforming Equipment & Manufacturing Technology, 2003, 38(4): 655-657.
[11]陈文琳, 朱玉生, 聂会星, 等. 半轴套管热挤压成形工艺数值模拟[J]. 农业机械学报, 2007, 38(11):153-156.
Chen W L, Zhu Y S, Nie H X, et al. Numerical simulation on hot extrusion process of half shaft bushing[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(11):153-156.
[12]王培安, 吴淑芳, 郭欢欢. 前筒挤压成形方案分析与参数优化[J]. 西华大学学报:自然科学版, 2019, 38(3):32-42.
Wang P A, Wu S F, Guo H H. Analysis and parameter optimization of extrusion forming process of the front tube[J]. Journal of Xihua University:Natural Science Edition, 2019, 38(3):32-42.
[13]杨程,路星星,孙跃,等. 空心轴成形技术研究现状[J]. 锻压技术,2018,43(1):1-8.
Yang C,Lu X X,Sun Y,et al. Research status on forming technology for hollow shaft [J]. Forging & Stamping Technology,2018,43(1):1-8.
[14]王习文, 宗长富, 郭立书, 等. 管件液压成形技术及其在汽车零部件制造中的应用[J]. 汽车工艺与材料, 2013, (4):17-22.
Wang X W, Zhong C F, Guo L S, et al. Pipe hydraulic forming technology and application in the manufacture of automotive parts [J]. Automobile Technology & Material, 2013, (4):17-22.
[15]张承鉴. 辊锻技术[M]. 北京:机械工业出版社, 1986.
Zhang C J. Roll Forging Technology[M]. Beijing: China Machine Press, 1986.
[16]王磊.厚壁空心件辊锻工艺模拟研究[D]. 长春:吉林大学, 2012.
Wang L. Simulation Research on Roll-forging Process for Thick-walled Hollow Part[D]. Changchun: Jilin University, 2012.
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9