锻压技术

行波管零件挤压成形质量影响因素分析

英文标题：Analysis on influencing factors of extrusion quality for traveling wave tube parts

作者：初红艳姜思宇程强赵凯林

分类号：TG376.3

出版年,卷(期):页码：2020,45(3):55-61

摘要：

以电子行业中铣床加工的行波管零件作为研究对象，其加工形状复杂、尺寸小、形位公差要求高、加工难度较大，生产成本较高。针对这些要求和问题，设计了两种冷挤压成形方案，并利用Deform软件对成形过程进行了数值模拟，依据仿真结果采用了有四周约束的凹模，同时分析了上模加载速度、摩擦系数和保压时间对最终产品质量的影响。最终以尺寸相对偏差为评价指标，通过正交实验得到了行波管零件挤压成形最佳工艺参数组合：上模加载速度为60 mm·s-1、摩擦系数为0.08、保压时间为3 min。并据此参数进行实验验证，得到了成形效果良好的行波管零件。研究结果对类似产品在生产中的工艺改进具有一定的指导意义。

The traveling wave tube (TWT) part processed by milling in an electronic industry has complex processing shape, small size, high requirements of form and position tolerances, large processing difficulty and high production cost. Based on the above requirements and problems, two kinds of cold extrusion schemes were designed, and the forming process was simulated by software Deform. According to the simulation results, the die with around constraints was used, and the influences of loading speed for upper die, friction coefficient and pressure holding time on the final product quality were analyzed. Finally, taking the relative deviation of dimensions as the evaluation index, the optimized technological parameters of extrusion for TWT parts were obtained by the orthogonal experiment with the loading speed of upper die of 60 mm·s-1, the friction coefficient of 0.08, and the pressure holding time of 3 min. Based on these parameters, experiments were conducted, and the traveling wave tube part with good forming effect was obtained. The research results have certain guiding significance for the process improvement of similar products in production.

基金项目：

北京市科技计划项目(Z181100003118001)

初红艳（1972-），女，博士，副教授 E-mail：chuhongyan@bjut.edu.cn 通讯作者：姜思宇（1994-），男，硕士研究生 E-mail：S201701703@emails.bjut.edu.cn

参考文献：

［1］张翔, 王高潮, 甘雯晴, 等. GH4169合金零件的冷挤压成形工艺
［J］. 锻压技术, 2019,44(4):101-105.

Zhang X, Wang G C, Gan W Q, et al. Cold extrusion forming process of GH4169 alloy parts
［J］. Forging & Stamping Technology, 2019,44(4):101-105.

［2］冯文杰, 陈莹莹, 米林, 等. 矩形花键轴冷挤压的数值模拟分析
［J］. 现代制造工程, 2007，(2):111-113.

Feng W J, Chen Y Y, Mi L, et al. Simulation of cold extrusion process of rectangle spline shaft
［J］. Modern Manufacturing Engineering, 2007，(2): 111-113.

［3］冯文杰, 刘吉, 陈莹莹, 等. 内斜齿轮冷挤压成形工艺方案
［J］. 锻压技术, 2019, 44(4):95-100.

Feng W J, Liu J, Chen Y Y, et al. Cold extrusion forming process of internal helical gear
［J］. Forging & Stamping Technology, 2019,44(4):95-100.

［4］Kim S Y, Kubota S, Yamanaka M. Application of CAE in cold forging and heat treatment processes for manufacturing of precision helical gear part
［J］. Journal of Materials Processing Technology, 2008, 201(1-3): 25-31.

［5］Satish G D, Singh N K, Ohdar R K. Preform optimization of pad section of front axle beam using DEFORM
［J］. Journal of Materials Processing Technology, 2008, 203(1-3): 102-106.

［6］张克潜, 李德杰. 微波与光电子学中的电磁理论
［M］. 北京:电子工业出版社，2001.

Zhang K Q, Li D J. Electromagnetic Jheory for Microwaves and Optoefectronics
［M］. Beijing: Publishing House of Electronics Industry，2001.

［7］王文祥, 余国芬, 宫玉彬. 行波管慢波系统的新进展——全金属慢波结构
［J］. 真空电子技术, 1995,（5）:30-37.

Wang W X, Yu G F, Gong Y B. The advance of slow-wave system for TWT-all-metal structure
［J］. Vacuum Electronics, 1995,（5）: 30-37.

［8］王文祥, 宫玉彬, 魏彦玉, 等. 大功率行波管新型慢波线技术的进展
［J］. 真空电子技术, 2002,（6）:13-18.

Wang W X, Gong Y B, Wei Y Y, et al. The advance of new slow-wave structure for high-power TWT
［J］. Vacuum Electronics, 2002,（6）: 13-18.

［9］Marcal P V, King I P. Elastic-plastic analysis of two-dimensional stress systems by the finite element method
［J］. International Journal of Mechanical Sciences, 1967, 9(3): 143-155.

［10］McMeeking R M, Rice J R. Finite-element formulations for problems of large elastic-plastic deformation
［J］. International Journal of Solids and Structures, 1975, 11(5): 601-616.

［11］陈如欣, 胡忠民. 塑性有限元法及其在金属成型中的应用
［M］. 重庆:重庆大学出版社, 1989.

Chen R X, Hu Z M. Plastic Finite Element Method and Its Application in Metal Forming
［M］. Chongqing: Chongqing University Press，1989.

［12］范步高. 正交试验方差分析的Excel通用计算与应用
［J］. 中国医药工业杂志, 2011, 42(10):793-795.

Fan B G. Excel calculation and application in analysis of variance for orthogonal experiment
［J］. Chinese Journal of Pharmaceuticals, 2011, 42(10):793-795.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】