锻压技术

球头销多工位冷锻工艺

英文标题：Multi-station cold forging process of ball pin

作者：吴艳云陈剑张东民李嘉伟

单位：上海应用技术大学

关键词：球头销多工位冷锻 Deform-3D 哈夫分模

分类号：TH162.1

出版年,卷(期):页码：2020,45(1):114-124

摘要：

基于理论分析与实验验证，提供了一种多工位冷锻工艺生产球头销。球头销多工位冷锻成形工艺存在两种可选方案，为了得到最佳成形方案，采用了Deform-3D有限元软件对两种工艺方案进行仿真计算。对比了两种方案的应力-应变、成形载荷、材料损伤值，得到最佳工艺方案。根据最佳工艺方案，设计了相应的模具，并针对球头销头部脱模困难的问题，提供了一种浮动哈夫分模方案。实验表明，球头销成形分配合理、填充饱满，无裂纹、飞边等缺陷，浮动哈夫分模顺畅。多工位冷锻工艺研究中，有限元技术的应用、模具及浮动哈夫分模的设计均对同类型的研究有一定的参考价值。

Based on theoretical analysis and experimental verification, a multi-station cold forging process was provided to produce ball pin, and there were two options for the multi-station cold forging process of ball pin. In order to get the best forming scheme, two process schemes were simulated by finite element software Deform-3D, and the best process scheme was obtained by comparing stress-strain, forming load and material damage values of two process schemes. Then, the corresponding die was designed according to the best process scheme, and for the difficulty of demoulding the ball pin head, a floating Half parting mold scheme was provided. The experiments show that the ball pin forming is well-distributed, full-filled, no cracks, no flashes and other defects, and the floating Half parting mold splits smoothly. Thus, in the research of multi-station cold forging process, the application of finite element technology and the design of die and floating Half parting mold have certain reference value for the same type of research.

基金项目：

企业横向项目（J2017-184）

作者简介：吴艳云（1966-），女，本科，高级工程师 E-mail：shwuyy@sit.edu.cn

参考文献：

[1]Weiss C, Morlock M M, Hoffmann N P. Friction induced dynamics of ball joints: Instability and post bifurcation behavior[J]. European Journal of Mechanics A/Solids, 2014, 45: 161-173.

[2]Alexandru P, Visa I, Alexandru C. Modeling the angular capability of the ball joints in a complex mechanism with two degrees of mobility[J]. Applied Mathematical Modelling, 2014, 38: 5456-5470.

[3]Tomasz B, Zbigniew P, Janusz T. Numerical and experimental analysis of a cross wedge rolling process for producing ball studs[J]. Archives of Civil and Mechanical Engineering, 2017, 17: 729-737.

[4]Pater Z, Bartnicki J, Samolyk G. Numerical modeling of cross-wedge rolling process of ball pin[J]. Journal of Materials Processing Technology, 2005, 164-165:1235-1240.

[5]Pater Z, Tofil A, Tomczak J, et al. Numerical analysis of the cross wedge rolling process (CWR) for a stepped shaft[J]. Metalurgija, 2015, 54: 177-180.

[6]Yuan W S, Wang L, Yuan T X. Experimental study on cross wedge rolling process of aluminum alloy material[A]. 2015 International Conference on Advanced Engineering Materials and Technology[C]. Atlantis Press, 2015.

[7]Lin X B, Xiao H S, Zhang Z L. Flow stress of carbon steel 08F in temperature range of warm-forging[J]. Journal of Materials Processing Technology, 2003, 139(1): 543-546.

[8]Faraji G, Jafarzadeh H, Jeong H J, et al. Numerical and experimental investigation of the deformation behavior during the accumulative back extrusion of an AZ91 magnesium alloy[J]. Materials and Design, 2012, 35: 251-258.

[9]Prasad Y V R K, Rao K P. Materials modeling and finite element simulation of isothermal forging of electrolytic copper[J]. Materials & Design, 2011, 32(4): 1851-1858.

[10]Ku T W, Kim L H, Kang B S. Multi-stage cold forging and experimental investigation for the outer race of constant velocity joints[J]. Materials & Design, 2013, 49: 368-385.

[11]Hu C L, Yin Q, Zhao Z. A novel method for determining friction in cold forging of complex parts using a steady combined forward and backward extrusion test[J]. Journal of Materials Processing Technology, 2017, 249: 57-66.

[12]Zhuang W H, Han X H, Hua L. Differences between traditional cold forging and cold orbital forging of a spur bevel gear[J]. Procedia Engineering,2017, 207: 442-447.

[13]Groenbaek J, Birker T. Innovations in cold forging die design[J]. Journal of Materials Processing Technology, 2000, 98(2): 155-161.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】