锻压技术

装出料机夹持机构的研究

英文标题：Research on clamping mechanism of loading and unloading machine

作者：李木山杨晋

单位：兰州交通大学

分类号：TG315

出版年,卷(期):页码：2019,44(9):127-132

摘要：

针对装出料机的应用工况研究了其夹持机构应满足的条件，明确了钳臂输出夹持力大小恒定的必要性，分析了结构参数对传力比及夹持装置的影响，并结合两种夹持方式的结构特点，确定了夹持机构的设计方案。根据材料摩擦系数随温度变化的趋势，分析了钳爪采用凸齿结构的合理性，明确了采用灰铸铁作为钳爪的材料。研究了装出料机夹持机构结构参数的设计思路，阐述了钳臂输出夹持力大小恒定的设计方法。依照装出料机夹持机构的研究思路，通过理论计算30 kN装出料机的夹持装置，验证了研究成果的可行性，为装出料机夹持装置的结构设计和理论研究提供了参考。

In view of the application condition of the loading and unloading machine, the conditions that the clamping mechanism should meet were studied, the necessity of constant output clamping force of clamping arm was clarified, the influences of structural parameters on the force transfer ratio and the clamping device were analyzed, and the design scheme of the clamping mechanism was determined by combining the structural characteristics of the two clamping modes. According to the trend of material friction coefficient changing with temperature, the rationality of adopting convex tooth structure for clamping claw was analyzed, and gray cast iron was defined as clamping claw material. Then, the design idea of the structural parameters of the clamping mechanism for the loading and unloading machine was studied, and the design method of the constant output clamping force for the clamping arm was described. According to the research idea of the clamping mechanism for the loading and unloading machine, the clamping device of 30 kN loading and unloading machine was calculated by the theoretical calculation, which verified the feasibility for the research results and provided a reference for the structural design and theoretical research of the clamping device for the loading and unloading machine.

基金项目：

国家自然科学基金资助项目(51265022)

李木山（1994-），男，硕士研究生 E-mail：1654733991@qq.com 通讯作者：杨晋（1962-），男，学士，教授 E-mail： yangjin@mail.lzjtu.cn

参考文献：

［1］高峰, 郭为忠. 中国机器人的发展战略思考
［J］. 机械工程学报, 2016,52(7):1-5.

Gao F, Guo W Z. Thinking of the development strategy of robots in China
［J］.Journal of Mechanical Engineering,2016,52(7):1-5.

［2］王田苗, 陶永. 我国工业机器人技术现状与产业化发展战略
［J］. 机械工程学报, 2014,50(9):1-13.

Wang T M, Tao Y. Research status and industrialization development strategy of Chinese industrial robot
［J］. Journal of Mechanical,Engineering，2014,50(9):1-13.

［3］万胜狄, 王运赣, 沈元彬. 锻造机械化与自动化
［M］. 北京：机械工业出版社, 1983.

Wan S D, Wang Y G,Shen Y B.Forging Mechanization and Automation
［M］.Beijing: China Machine Press, 1983.

［4］王建军. 搬运机械手仿真设计和制作
［J］. 机械设计与制造, 2012, (9):146-148.

Wang J J. Simulation design and manufacture of handing manipulator
［J］.Machinery Design & Manufacture,2012, (9):146-148.

［5］毛金城, 杨文玉. 重载工业夹持器约束建模与承载能力分析
［J］. 华中科技大学学报: 自然科学版,2011,39(12)：1-5.

Mao J C, Yang W Y. Constraint modeling and loading capacity analysis of heavy-duty industrial grippers
［J］. Journal of Huazhong University of Science and Technology: Natural Science Edition, 2011, 39(12):1-5.

［6］袁航,张青,张勇,等. 锻造操作机夹持机构优化设计
［J］.机械设计与研究, 2014,30(4):6-10.

Yuan H, Zhang Q, Zhang Y, et al. Optimization design of the forging manipulator′s gripper
［J］. Machine Design and Research, 2014,30(4):6-10.

［7］丁彩红,张中,赖勇. 主从机械手手爪设计与优化
［J］. 机械设计与制造, 2018, (12):181-184.

Ding C H, Zhang Z, Lai Y. Remote control manipulator gripper design and optimization
［J］.Machinery Design & Manufacture,2018, (12):181-184.

［8］陈康, 郑茂琦, 马春翔,等. 基于遗传算法对锻造操作机夹钳机构的优化
［J］. 机械设计与研究, 2014, 30(1)：8-12.

Chen K, Zheng M Q, Ma C X,et al.Optimization design of forging manipulator clamp based on genetic algorithm
［J］. Machine Design and Research, 2014, 30(1)：8-12.

［9］闻邦椿, 张义民, 鳄中凯, 等. 机械设计手册
［M］.5版.北京: 机械工业出版社, 2010.

Wen B C, Zhang Y M, E Z K, et al. Machine Design Handbook
［M］. The 5th Edition. Beijing: China Machine Press,2010.

［10］温诗铸, 黄平. 摩擦学原理
［M］. 2版. 北京: 清华大学出版社, 2002.

Wen S Z, Huang P. Tribological Principle
［M］. The Second Edition. Beijing: Tsinghua University Press,2002.

［11］刘艳妍, 桑育鑫, 何琪功. 锻造操作机钳口的结构分析与设计
［J］. 锻压技术, 2017,42(1):86-91.

Liu Y Y, Sang Y X, He Q G.Structure analysis and design on the jaw for forging manipulator
［J］. Forging & Stamping Technology,2017,42(1):86-91.

［12］张涛,王宁昌,程鑫，等. 销轴设计方法的比较研究
［J］. 机械强度, 2015,37(3):461-466.

Zhang T, Wang N C, Cheng X,et al.The comparison research on design methodology of pins
［J］.Journal of Mechanical Strength,2015,37(3):461-466.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】