网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
V型曲轴成形工艺探析(1)
英文标题:Research on Vstyle crankshaft forming process (1)
作者:岳镇 
单位:一汽锻造(吉林)有限公司 
关键词:V型曲轴 锻造成形 扭转成形 扭转模具 扭转原理 
分类号:TG312
出版年,卷(期):页码:2019,44(8):12-17
摘要:

 简要对比了曲轴锻造成形和扭转成形两种工艺的优劣,基于红旗V6曲轴开发实例,对V型扭转曲轴的产品特点进行了说明,对其锻造工艺进行了论述和总结。针对V6扭转曲轴连杆颈组合区域锻造成形时极易产生折叠的问题,采用对比试验和模拟试验的研究方法,选择了合理的工艺方案,解决了此难题。在设备选型方面,以一汽锻造现有生产线为例,对扭转主机、步进梁等关键设备的参数选型进行了论述,阐述了扭转工步原理及扭转动作分解,对扭转模体、扭转模具等设计难点逐一分析,并给出了切实可行的解决方案。

 The advantages and disadvantages of forging forming and twisting forming for crankshaft were briefly compared. Based on the development example of Hongqi V6 crankshaft, the product characteristics of Vstyle twist crankshaft were described, and the forging process was discussed and summarized. For the problem of being prone to folding on V6 twist crankshaft pin area when forging, the research methods of comparison test and simulation test were carried on, the reasonable process plan was selected, and the problem was solved. In terms of equipment selection, taking the existing production line of FAW forge company as example, the selection parameters of key equipments for twist press and walking beam were discussed in detail, and the twist step principle and twisting movement decomposition were expounded. The design difficulties of twist dieset and twist die were analyzed one by one, and the practical solutions were given.

基金项目:
作者简介:
岳 镇(1981-),男,学士,高级工程师 Email:yz_dz@faw.com.cn
参考文献:

[1]陈学慧, 陈镇. 三缸曲轴扭转成形工艺及设备开发[J]. 锻造与冲压,2018,(11):57-61.


Chen X H, Chen Z. Three-cylinder crankshaft twisted forming process and equipment development [J]. Forging & Metalforming,2018,11):57-61.


[2]岳镇,周久红,蔡宏伟,等. 某三缸曲轴自动线锻造工艺开发实例[J]. 金属加工:热加工,2018,(11):12-15.


Yue ZZhou J H, Cai H W, et al. Development of threecylinder crankshaft forging process for automatic production line [J]. MW Metal Working, 2018,11):12-15.


[3]岳镇. 乘用车曲轴自动线锻造工艺研究[J]. 金属加工:热加工,2017,(15):33-35.


Yue Z. Research on car crankshaf forging process of automatic production line [J]. MW Metal Working, 2017,15):33-35.


[4]岳镇,蔡宏伟,孙文东,等. 乘用车曲轴自动线复合模工艺研究[J]. 金属加工:热加工,2017,(19):29-31.


Yue Z, Cai H W, Sun W D, et al. Research on automatic line compound die process of passenger car crankshaft[J]. MW Metal Working, 2017,(19):29-31.


[5]岳镇, 王丹丹, 王洪兴, . 曲轴自动线模具结构及翻新工艺研究[J]. 锻造与冲压,2017,(15): 63-67.


Yue ZWang D D, Wang H X, et al. Research on automatic line crankshaft die structure and renew process[J]. Forging & Metalforming, 2017,(15): 63-67.


[6]岳镇, 王洪兴, 蔡宏伟, . 锻钢曲轴毛坯动平衡解决方案()[J]. 锻造与冲压,2017,(9): 28-32.


Yue Z, Wang H X, Cai H W, et al. Forged steel crankshaft dynamic balance solution(1) [J]. Forging & Metalforming, 2017,(9): 28-32.


[7]岳镇, 王洪兴, 蔡宏伟, . 锻钢曲轴毛坯动平衡解决方案(下)[J]. 锻造与冲压,2017,(11): 42-45.


Yue Z, Wang H X, Cai H W, et al. Forged steel crankshaft dynamic balance solution(2) [J]. Forging & Metalforming, 2017,(11): 42-45.


[8]仇建华, 张亚岐, 杨仁康, . 飞边槽结构对汽车曲轴模锻成形的影响[J]. 锻压技术,2018,43(5):17-22.


Qiu J H, Zhang Y Q, Yang R K, et al. Influence of flash cavity structure on die forging forming of automobile crankshaft [J]. Forging & Stamping Technology, 2018, 43(5):17-22. 


[9]安杰,张海伟. 曲轴锻模结构设计[J]. 金属加工:热加工,2013,(7):59-59.


An J, Zhang H W. Crankshaft forging die design [J]. MW Metal Working,2013,(7):59-59.


[10]于宜洛,阮艳静,夏占雪, . 立体分模六缸曲轴锻造工艺设计及ProE软件的应用[J]. 锻造与冲压, 2007,(8): 48-52.


Yu Y L, Ruan Y J, Xia Z X, et al. Sixcylinder crankshaft forging process design and application of Pro/E software[J]. Forging & Metalforming, 2007,(8): 48-52.


[11]夏占雪, 邓连元. 扭曲成形 大型曲轴锻造最佳解决方案[J]. 锻造与冲压, 2006,(1): 68-71.


Xia Z X,Deng L Y. Twisted forming The best solution for large crankshaft forging [J]. Forging & Metalforming, 2006, (1): 68-71.


[12]马明. 曲轴先进锻造技术的研究与应用[J].内燃机与配件, 2018,(11): 131-132.


Ma M. Research and application of advanced forging technology of crankshaft [J]. Internal Combustion Engine & Parts, 2018,(11): 131-132.

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9