网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
一种新辊型的增量滚压成形过程仿真
英文标题:Simulation of incremental rolling process for a new roller profile
作者:殷继丽 朱光明 丁明凯 高绪杰 郭娜娜 王宗申 
单位:山东理工大学 机械工程学院 山东 淄博 255000 
关键词:增量滚压成形 微沟槽 辊轮形状 成形载荷 仿真模拟 
分类号:增量滚压成形;微沟槽;辊轮形状;成形载荷;仿真模拟
出版年,卷(期):页码:2019,44(5):6-13
摘要:

 Incremental rolling technology is a process of rolling microgroove structure on sheet metal surface by incremental forming. Based on the principle of the process, the traditional single roller profile was designed into four kinds of roller profile, and the incremental rolling process of the new roller profile was simulated by finite element software. Then, the forming quality of the new roller profile was compared with that of the traditional roller profile, and the material flow characteristics of workpiece during the rolling process of the new roller profile were analyzed. The results show that the microgroove height of the new roller profile is equal to that of the traditional roller profile after rolling, but the accumulation at the end of workpiece formed by the latter is less than that of the former. However, the forming load of the new roller profile is smaller. Furthermore, the flow characteristics of workpiece material during the forming process are obtained by the analysis of the velocity field, equivalent stress field and strain field of workpiece, which provides an effective reference for the optimization design of roller in the future.

基金项目:
国家自然科学基金资助项目(51605266);山东省自然科学基金资助项目(ZR2017EMM036,ZR2017BEM003)
作者简介:
作者简介:殷继丽 (1993-),女,硕士研究生 Email:18369904525@163.com 通讯作者:朱光明(1976-),男,博士,教授 Email:zgm@sdut.edu.cn
参考文献:

 
[1]刘克松, 江雷. 仿生结构及其功能材料研究进展
[J]. 科学通报, 2009,54(18): 2667-2681.


Liu K S, Jiang L. Research progress on biomimetic structural and functional materials
[J]. Chinese Science Bulletin, 2009,54(18): 2667-2681.[ZK)]


[2]杨辉, 张彬, 张利鹏. 微结构功能表面的应用及制造
[J]. 航空精密制造技术, 2015,51(5): 1-6

 Yang H, Zhang B, Zhang L P. Application and manufacture of microstructure function surface
[J]. Aviation Precision Manufacturing Technology, 2015, 51(5): 1-6.[ZK)][LL]


[3]Hirt G, Thome M. Rolling of functional metallic surface structures
[J]. CIRP AnnalsManufacturing Technology, 2008,57(1): 317-320.[ZK)]


[4]Hirt G, Thome M. Large area rolling of function almetallic micro structures
[J]. Production Engineering, 2007, 1(4): 351-356.[ZK)]


[5]Zhou R, Cao J, Ehmann K, et al. An investigation on deformationbased surface texturing
[J]. Journal of Manufacturing Science and Engineering, 2011,133(6): 613-619.[ZK)]


[6]Lu B, Meng W J. Roll molding of microchannel arrays on Al and Cu sheet metals:A method for highthroughput manufacturing
[J]. Journal of Micro and NanoManufacturing, 2014,2(1): 007-011. [ZK)]


[7]Gao Z Y, Peng L F, Yi P Y, et al. Grain and geometry size effects on plastic deformation in rolltoplate micro/mesoimprinting process
[J]. Journal of Materials Processing Technology, 2015,219(5):28-41.[ZK)]


[8]高照阳, 彭林法, 易培云,等. 微细辊对平板滚压成形工艺建模与尺度效应分析
[J]. 机械工程学报, 2013, 49 (6): 179-186.

 Gao Z Y, Peng L F, Yi P Y, et al. Modeling and size effect analysis of micro/meso rolltoplate imprinting process
[J]. Journal of Mechanical Engineering, 2013,49 (6): 179-186.


[9]王博. 平面板材表面滚压成形微沟槽数值模拟研究
[D]. 吉林: 吉林大学, 2015.

 Wang B. Numerical Simulation Research of Rolling Microgroove on Surface of Flat Sheet Metal
[D]. Jilin : Jilin University, 2015.


[10]王传果. 板材表面微沟槽滚压成形工艺研究
[D]. 吉林: 吉林大学, 2016.

 Wang C G. Study on Roll Forming Grooves on the Surface of Sheet Metal
[D]. Jilin : Jilin University, 2016.


[11]Klocke F, Feldhaus B, Mader S. Development of an incremental rolling process for the production of defined riblet surface structures
[J]. Production Engineering, 2007,1(3): 233-237. 


[12]Terhorst M, Trauth D, Klocke F. Riblet rolling on Ti6Al4V compressor blades
[J]. Springer Berlin Heidelberg, 2015, (5):245-250.


[13]Hergt A, Hage W, Grund S, et al. Riblet application in compressors: Towards efficient blade design
[J]. Journal of Turbomachinery,2014,137(11): 106-110.


[14]雷玉成, 汪建敏, 贾志宏. 金属材料成型原理
[M]. 北京: 化学工业出版社, 2006.

 Lei Y C, Wang J M, Jia Z H. Forming Principle of Metal Materials
[M]. Beijing: Chemical Industry Publishing House, 2006.
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9